投审稿入口

安钢2号高炉炉墙结厚的原因及处理

Causes and handling of wall accretion in the hearth of Anyang Steel No.2 BF

  • 摘要: 安钢2号高炉炉腹、炉腰、炉身1层和炉身2层出现明显结厚现象,造成炉况难行并严重失常,悬料、滑料和管道等异常炉况现象频繁发生。认为炉墙结厚的主要原因,一是焦炭质量劣化,二是烧结矿质量下降,三是操作调整与应对措施力度不足。在处理过程中,先对炉腹、炉腰和炉身下部的炉墙结厚进行处理,再对炉身中上部的的炉墙结厚进行处理,主要通过采取调整布料矩阵、降低焦炭负荷、封堵风口和配加洗炉剂等综合措施,经过前后10天时间,炉况基本恢复正常。

     

    Abstract: Wall accretion develops greatly in the bosh,belly,the first and second section of the stack of Anyang Steel No.2BF,leading to severe unsmooth furnace running,and severe abnormal conditions;burden hanging,slipping,and channeling occur frequently.It is believed that these problems are mainly caused by:(1) deteriorated of coke quality;(2) degraded sinter quality;(3) improper operational adjustments and countermeasures.During the trouble shooting process,the wall accretion elimination work starts from the bosh,belly,and lower part of the stack,and then extends to the middle and upper part of the stack.The measures mainly include adjusting the burden distribution matrix,lowering the coke load,blocking the tuyere,and dosing the furnace slugging agents.After about 10 days of efforts,the furnace conditions restore normal.

     

/

返回文章
返回