投审稿入口

京唐5500m3高炉兰炭喷吹性能及工业试验

Characteristic and industrial test of semi-coke injection in Shougang Jingtang 5500m3 BF

  • 摘要: 为推动高炉喷吹兰炭的工业化应用,结合京唐5 500m3高炉兰炭喷吹性能,从工业分析、元素分析、可磨性指数、燃烧性能等方面与高炉喷吹无烟煤及烟煤进行了对比分析,并开展高炉喷吹兰炭工业试验。结果表明:(1)兰炭固定碳含量高、硫氮含量低、可磨性较差,燃烧性能优于部分无烟煤,适合与烟煤、无烟煤混合,作为高炉喷吹煤粉使用;(2)随着兰炭配比的提高,混合煤硫分显著降低,但水分升高、固定碳含量降低,导致高炉焦比及燃料比上升;(3)京唐高炉与首钢股份3号高炉喷吹兰炭工业试验结果存在差异,其原因在于炉温、混合煤水分及固定碳含量不同。

     

    Abstract: To propel the industrial application of semi-coke injection in blast furnaces,the characteristics of semi-coke injection are compared with that of anthracite and bituminous coal injection in terms of proximate analysis,ultimate analysis,Hardgrove index,and combustion behavior based on the experience in Shougang Jingtang 5500m3 blast furnace,and industrial tests of semi-coke injection are performed also.The test results suggest that:(1) semi-coke features high fixed carbon content,low sulfur and nitrogen contents,poor Hardgrove index,but better combustion behavior than some types of anthracite,thus it is suitable for blending with bituminous coal and anthracite as PCI fuel;(2) as the proportion of semi-coke increases,the sulfur content of the mixed coal decreases significantly,moisture content increases and fixed carbon content decreases,which will lead to higher coke rate and fuel rate of the blast furnace;(3) the industrial test results of semi-coke injection in Jingtang blast furnace are different from that in No.3 blast furnace of Shougang.and the main reasons fall on differences in furnace temperature,moisture content and fixed carbon content of the mixed coal.

     

/

返回文章
返回