投审稿入口

湛钢氢基竖炉高氢生产试验分析

Analysis on high-hydrogen production test in Zhanjiang Steel hydrogen-based shaft furnace

  • 摘要: 对湛钢氢基竖炉高氢生产试验进行了总结,重点阐述了还原气流量、加热炉出口温度及竖炉入口温度对DRI质量的影响,对比了满负荷生产与高氢生产主要工艺参数,明确了氢基竖炉高氢冶炼的控制手段及碳减排效果。试验结果表明:(1)完成周达产功能考核,证明了湛钢氢基竖炉能使用天然气、H2、焦炉煤气混合气体实现高氢生产;(2)通过调整DRI产量、提升焦炉煤气用量、调整水分,以及在还原回路停止补充天然气,竖炉入口工艺气含H2量突破70%,最高升至74%,实现了高氢操作;(3)相比于高炉炼铁,氢基竖炉生产DRI碳减排效果明显,减少CO2排放量在60%以上。

     

    Abstract: It is summarized the high-hydrogen production test of hydrogen-based shaft furnace in Zhanjiang Steel with the key point falling on the effects of reducing gas flow rate,heater outlet temperature,and shaft furnace inlet temperature on DRI quality.In addition,the main process parameters under full-capacity production and high-hydrogen production are compared;the high-hydrogen smelting control measures and carbon reduction effect of the hydrogen-based shaft furnace are introduced.The test results show that:(1) the test of weekly production capacity is successful,demonstrating that this shaft furnace can achieve high-hydrogen production fueled by the mixed gas of natural gas,H2,and coke oven gas;(2) by adjusting DRI output,using more coke oven gas,controlling moisture,and stopping natural gas supplementation in the reduction loop,the H2 content in the process gas at the shaft furnace inlet tops 70%,up to 74%,manifesting the realization of highhydrogen operation;(3) compared with blast furnace ironmaking,the hydrogen-based shaft furnace is remarkable in carbon reduction and its CO2 emission is reduced by over 60%.

     

/

返回文章
返回