投审稿入口

张宣科技氢基竖炉球团矿涂覆技术的开发及应用

Development and application of pellet coating technology for H2-based shaft furnace in ZXHT

  • 摘要: 球团矿被装入竖炉之前,需进行预膜处理,在其表面涂一层涂覆剂,主要目的是降低球团矿颗粒间在还原过程中的黏结倾向,以便尽可能提高竖炉还原气进口温度。张宣科技因地制宜合理选择涂覆剂,研究合理的涂覆剂用量、浆液浓度对球团矿黏结性指数及还原性的影响。氢基竖炉投产初期,涂覆剂A用量为5.0 kg/t,按每1 kg涂覆剂A配加3.8 L水制成涂覆浆液,实现了稳定、顺利生产;之后,通过调整涂覆浆液浓度,将还原气进口温度由1000℃提高至1030℃,改善了竖炉技术经济指标,降低了涂覆剂的消耗量,涂覆成本低于1.40元/t。

     

    Abstract: The pellets need pre-coating on their surface before charging to the shaft furnace with the primary purpose of weakening the sticking behavior of the pellet in the reduction process,so as to enable higher inlet temperature of the reducing gas to the shaft furnace.ZXHT selects an appropriate coating agent according to the local conditions,and makes a study with respect to the influence of the coating agent dosage and coating solution chemical proportioning on the pellet sticking index and reducibility.At the earlier startup operation period of the hydrogen-based shaft furnace,the dosage of the coating agent A is5.0 kg/t with a coating solution prepared by adding 3.8 L of water per 1 kg of coating agent A;it is proved application of this coating agent promotes stable and smooth running of the furnace.The subsequent chemical concentration adjustment of the coating solution enables the reducing gas inlet temperature to be successfully increased from 1000℃ to 1030℃,thereby improving the technoeconomic indicators of the shaft furnace and reducing the consumption of the coating agent.The coating cost falls to below 1.40 RMB/t.

     

/

返回文章
返回