Abstract:Converter steelmaking is a complex open system, which is affected by interaction of many factors simultaneously or alternately, such as multiple chemical reactions of different impurity elements or substances, continuous rising and control of temperature, inhomogeneous spontaneous stirring of molten pool, inhibiting liquid steel peroxidation during removal of impurity elements, fine operation and timing control in converter etc., its operation law within its space-time boundary is dynamic and nonlinear. The isolated system knowledge is not appropriate to reveal the transformation law from traditional single production output index to multi-objective coordination for production output, quality and environmental protection etc. The functional orientation of modern converter steelmaking should be focus on efficient and stable primary smelting of clean molten steel, and then combined with subsequent molten steel refining technique to meet the furnace-machine matching requirements of multi-heats continuous casting with high / constant drawing speed in the whole process. From vision of function positioning and related operations timing matching of converter steelmaking, the "point technique" containing furnace protection by slag splashing, efficient oxygen supply, molten pool uniform mixing, composition of molten steel matched with temperature, post stirring, rapid steel extraction and separation of slags and steel, efficient recovery of converter gas were discussed. It points out that the aim of above-mentioned "point technique" application should be focused on fine control effect, at the same time, it is necessary to meet the requirements of timing planning of converter steelmaking and collaborative operation of upstream and downstream processes, so as to ensure high quality, stable and smooth operation of the whole process, and constantly tap the ultimate potential of converter steelmaking.
王杰, 曾加庆, 杨利彬, 汪成义. 转炉炼钢过程的精细化控制及协同优化[J]. 钢铁, 2022, 57(5): 55-63.
WANG Jie, ZENG Jia-qing, YANG Li-bin, WANG Cheng-yi. Fine control technology and its co-optimization of converter steelmaking[J]. Iron and Steel, 2022, 57(5): 55-63.
[1] Kumakura M. Advances in steel refining technology and future prospects[J]. Nippon Steel Technical Report, 2013, 104(3): 5. [2] 高泽平.钢冶金学[M].北京:冶金工业出版社,2016.(GAO Ze-ping. Steel Metallurgy[M]. Beijing: Metallurgical Industry Press, 2016. [3] 殷瑞钰.冶金流程工程学[M].北京:冶金工业出版社,2004.(YIN Rui-yu. Metallurgical Process Engineering[M]. Beijing: Metallurgical Industry Press, 2004.) [4] 汪锡章, 谢国宏. 论宝钢转炉的经济炉龄[J]. 宝钢技术, 1997(2):36.(WANG Xi-zhang, XIE Guo-hong. A survey of the economic lining life of Baosteel BOF[J]. Bao Steel Technology, 1997(2):36.) [5] 侯安贵, 蒋晓放. 宝钢炼钢的技术进步与展望[J]. 宝钢技术, 2008(2):1.(HOU An-gui, JIANG Xiao-fang. Progress and prospects of steelmaking technology at Baosteel[J]. Baosteel Technology, 2008(2):1.) [6] 郑贻裕, 牟济宁, 沈钟铭. 加强耐火材料研发技术应用适应宝钢炼钢技术发展[J]. 耐火材料, 2011,45(5):345.(ZHENG Yi-yu,MOU Ji-ning, SHEN Zhong-ming. Strengthening the R & D and application of refractories to adapt to the development of steelmaking technology in Baosteel[J]. Refractory, 2011,45(5):345.) [7] Emi T. Steelmaking technology for the last 100 years: Toward highly efficient mass production systems for high quality steels[J]. ISIJ International, 2015, 55(1): 36. [8] 王新华,李金柱,刘凤刚. 转型发展形势下的转炉炼钢科技进步[J].炼钢,2017,33(1):1.(WANG Xin-hua, LI Jin-zhu, LIU Feng-gang. Technological progress of BOF steelmaking in period of development mode transition[J]. Steelmaking, 2017,33(1):1.) [9] 高攀,李海波,郭玉明,等. 首钢转炉炼钢高效复吹技术开发与应用[J].炼钢, 2018,34(1):1.(GAO Pan, LI Hai-bo, GUO Yu-ming, et al. Development and application of high efficiency blowing technology of converters in Shougang[J]. Steelmaking,2018,34(1):1.) [10] 李姣,于会香,王新华,等. 转炉底吹枪优化布置的数值模拟[J]. 钢铁, 2018,53(2):32.(LI Jiao, YU Hui-xiang, WANG Xin-hua, et al. Optimization of arrangement of bottom tuyeres through numerical simulation[J]. Iron and Steel, 2018,53(2): 32.) [11] 杨利彬,曾加庆,邓勇,等. 大型转炉高效率,长寿命顶底复合吹炼技术[J].钢铁, 2020,55(4):45.(YANG Li-bin, ZENG Jia-qing, DENG Yong, et al. High efficiency and long-life combined blowing technology of big converter[J]. Iron and Steel,2020,55(4): 45.) [12] 薛瑞, 张燕超, 张彩军, 等. 转炉底吹供气方式对熔池混匀效果的数值模拟[J]. 中国冶金, 2020, 30(3): 13. (XUE Rui, ZHANG Yan-chao, ZHANG Cai-jun, et al. Numerical simulation of influence of bottom blowing gas supply mode on converter mixing effect[J]. China Metallurgy, 2020, 30(3): 13.) [13] 王杰,曾加庆,杨利彬,等. 复吹转炉少渣脱磷炼钢工艺过程分析[J]. 炼钢, 2015, 31(3):31.(WANG Jie, ZENG Jia-qing, YANG Li-bin, et al. Theoretical analysis and trial experiments on combined blown converter less slag dephosphorization steelmaking process[J]. Steelmaking, 2015, 31(3):31.) [14] 中西 恭二. 底吹きおよび上底吹き転炉の浴内混合と冶金反応 (転炉製鋼特集号)[J]. Kawasaki Steel Giho, 1983,15(2): 100. [15] 曽根英彰, 加藤雄一郎, 熊倉誠治. 製鋼技術の進展と今後の展望 (製鋼特集)[J]. 日本製鉄技報, 2019 (414): 3. [16] 齋藤幸介, 中村修也, 酒井宏明, 等. 新溶銑処理プロセス導入による高効率製鋼プロセスの構築 (特集 鉄鋼生産技術)[J]. R&D 神戸製鋼技報, 2019, 69(2): 32. [17] 刘小亮, 曾加庆, 马登,等. 转炉底吹供气方式对熔池搅拌的影响[J]. 钢铁研究学报,2017,29(12):990.(LIU Xiao-liang, ZENG Jia-qing, MA Deng, et al. Influence of bottom blowing gas supply mode on bath stirring in converter[J]. Journal of Iron and Steel Research, 2017, 29(12):990.) [18] 刘小亮,曾加庆,王杰,等.底吹方式对渣-钢界面影响规律的水模型[J].钢铁,2016, 51(8):29.(LIU Xiao-liang, ZENG Jia-qing, WANG Jie, et al. Water model about effect of bottom blowing on slag-steel interface[J].Iron and Steel,2016, 51(8):29.) [19] 曾加庆, 杨利彬, 王杰,等. 底吹搅拌对复吹转炉脱磷工艺的作用分析[J]. 钢铁, 2017, 52(6):40. (ZENG Jia-qing, YANG Li-bin, WANG Jie, et al. Effect of bottom blowing on dephosphorization technology in combined blowing converter[J]. Iron and Steel, 2017, 52(6):40.) [20] 松尾亨, 森明義, 山崎勲, et al. 2基の転炉を用いる向流精錬法開発[J]. まてりあ: 日本金属学会会報, 1995, 34:614. [21] 江原猛, 岩本隆, 三木祐司. 高清浄度·高品質軸受鋼の製造技術[J]. 川崎製鉄技報, 2002, 34(2): 101. [22] Kawasaki S,Hirahashi H,Aoki M, et al. Improvement of the refining process around combined blowing converter in Kobe Works[J]. Tetsu-to-Hagane, 1990, 76(11):1900. [23] Tabata Y,Terada O,Hasegawa T, et al. Manganese partition equilibrium in less slag blowing at bof linked to high speed dephosphorization of hot metal[J]. Tetsu-to-Hagane, 1990, 76(11):1916. [24] 刘浏,郭征,杜挺.顶-底复合吹炼熔池氧含量传质模型的研究[C]//全国第五届冶金过程物理化学年会论文集(下). 北京:中国金属学会, 1984:202.(LIU Liu, GUO Zheng, DU Ting. Oxygen mass transfer model study on top and bottom combined blowing process[C]//Proceedings of the Fifth National Annual Conference on Physical Chemistry of Metallurgical Process (Part 2). Beijing:Chinese Society of Metals, 1984:202.) [25] (日)野崎努著.底吹转炉法: 引进·搅拌效果·顶底复合吹炼[M]. 张柏汀, 张劲松,译. 北京:冶金工业出版社, 2008.((Japan) Nagasaki. Bottom Blown Converter Method: Introduction·Mixing Effect·Top Bottom Combined Blowing [M]. Translated by ZHANG Bo-ting, ZHANG Jin-song. Beijing: Metallurgical Industry Press, 2008.) [26] 熊倉政宣. 精錬技術の進展と今後の展望 (製鋼特集)[J]. 新日鉄技報, 2012, 394(104): 4. [27] 草田泰明, 位一平, 佐藤幸太郎,等. 大分製鉄所における鉄ロス低減の取り組み (製鋼特集)[J]. 日本製鉄技報, 2019(414): 138.