Comprehensive optimization setting technology of emulsion flow in cold rolling process
BAI Zhen-hua1,2,HOU Bin1,SONG He-chuan1,LI Bo-yang1,DU Jiang-cheng1,HUA Chang-chun3
(1. National Engineering Research Center for Equipment and Technology of Cold Strip Rolling, Yanshan University,Qinhuangdao 066004, Hebei, China 2. State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004, Hebei, China 3. Electrical Engineering College, Yanshan University, Qinhuangdao 066004, Hebei, China)
Abstract:With reference to the problems of fixed emulsion flow distribution,being unble to be adjusted dynamically with the change of rolling speed,this study made a lot of field experiments and theoretical research to study the comprehensive optimization setting technology of emulsion in cold rolling process. The technology fully considered the mechanical and technological characteristics of cold rolling unit,and put forward a dynamic setting method of emulsion flow. The best overall cooling effect of cold rolling unit and uniform cooling capacity among stands were taken as the control targets,the maximum permissible emulsion flow and optimum emulsion flow in theory were taken as constraints,then the cooling capacity coefficient of emulsion was present for the first time. The method was developed to use in a sertain 1 220 five stands cold rolling unit,and obtained good results. The emulsion cooling capacity of each stand was fully utilized,the abnormal increase of the rolling force and rolling pressure upside down caused by inadequate emulsion flow were avoided,creating greater economic benefits for enterprises with further popularization and application values.
收稿日期: 2016-07-11
出版日期: 2017-03-10
引用本文:
白振华,侯 彬,宋和川,李柏阳,杜江城,华长春. 冷连轧过程乳化液流量综合优化设定技术[J]. 钢铁, 2017, 52(3): 58-63.
BAI Zhen-hua,,HOU Bin,SONG He-chuan,LI Bo-yang,DU Jiang-cheng,HUA Chang-chun. Comprehensive optimization setting technology of emulsion flow in cold rolling process. Iron and Steel, 2017, 52(3): 58-63.
徐俊,邱格君,白振华.高速冷连轧时工艺润滑的优化技术[J].轧钢,2005,22(5):12-14.XU Jun, QIU Ge-jun, BAI Zhen-hua. Optimization of Process Lubrication System of Cold Tandem Rolling[J]. Steel Rolling, 2005, 22(5):12-14.
[1]
徐俊,邱格君,白振华.高速冷连轧时工艺润滑的优化技术[J].轧钢,2005,22(5):12-14.XU Jun, QIU Ge-jun, BAI Zhen-hua. Optimization of Process Lubrication System of Cold Tandem Rolling[J]. Steel Rolling, 2005, 22(5):12-14.
[2]
刘凯,胡滨,李连胜,等.邯钢新冷轧乳化液系统的优化[J].轧钢,2011,28(6):54-56.LIU Kai, HU Bin, LI Lian-sheng, et al. Optimization of the Emulsion System of Hanbo Cold Rolling Mill of Handan Iran & Steel Co.,Ltd.[J]. Steel Rolling, 2011, 28(6):54-56.
[2]
刘凯,胡滨,李连胜,等.邯钢新冷轧乳化液系统的优化[J].轧钢,2011,28(6):54-56.LIU Kai, HU Bin, LI Lian-sheng, et al. Optimization of the Emulsion System of Hanbo Cold Rolling Mill of Handan Iran & Steel Co.,Ltd.[J]. Steel Rolling, 2011, 28(6):54-56.
[3]
顾正秋.轧制工艺润滑理论分析[J].辽宁科技大学学报,1981,(3):97-107.GU Zheng-qiu. Theoretical Analysis of Lubrication in Rolling Process[J]. Journal of University of Science and Technology Liaoning, 1981,(3):97-107.
[3]
顾正秋.轧制工艺润滑理论分析[J].辽宁科技大学学报,1981,(3):97-107.GU Zheng-qiu. Theoretical Analysis of Lubrication in Rolling Process[J]. Journal of University of Science and Technology Liaoning, 1981,(3):97-107.
[4]
李红翠,张虎.济钢冷轧生产中热划伤现象的研究[J].山东冶金,2007,29(6):52-54.LI Hong-cui, ZHANG Hu. Study on the Heatstreaks in the Cold Rolling Process of Ji Iran & SteelCo.,Ltd.[J]. Shandong Metallurgy, 2007,29(6):52-54.
[4]
李红翠,张虎.济钢冷轧生产中热划伤现象的研究[J].山东冶金,2007,29(6):52-54.LI Hong-cui, ZHANG Hu. Study on the Heatstreaks in the Cold Rolling Process of Ji Iran & SteelCo.,Ltd.[J]. Shandong Metallurgy, 2007,29(6):52-54.
[5]
肖刚,胡秋.冷轧摩擦热计算及温升模型研究[J].润滑与密封,2002,(3):13-14.XIAO Gang, HU Qiu. Calculate of Friction Heat and Study of Temperature Rise in Cold Rolling[J]. Lubrication Engineering, 2002,(3):13-14.
[5]
肖刚,胡秋.冷轧摩擦热计算及温升模型研究[J].润滑与密封,2002,(3):13-14.XIAO Gang, HU Qiu. Calculate of Friction Heat and Study of Temperature Rise in Cold Rolling[J]. Lubrication Engineering, 2002,(3):13-14.
[6]
刘涛,王益群,邢艳杰.带钢冷轧过程轧辊热变形参数的智能优化[J].燕山大学学报,2011,35(5):402-406.LIU Tao, WANG Yi-quan, XING Yan-jie. Intelligent Optimization of Hot Deformation Parameters of Roll in Strip Cold Rolling Process[J]. Journal of Yanshan University, 2011,35(5):402-406.
[6]
刘涛,王益群,邢艳杰.带钢冷轧过程轧辊热变形参数的智能优化[J].燕山大学学报,2011,35(5):402-406.LIU Tao, WANG Yi-quan, XING Yan-jie. Intelligent Optimization of Hot Deformation Parameters of Roll in Strip Cold Rolling Process[J]. Journal of Yanshan University, 2011,35(5):402-406.
[7]
黄光杰,王凌云.冷轧变形热及温升研究[J].金属成形工艺.1999,17(1):21-25.HUANG Guang-jie, WANG Ling-yun. Study on the Deformation Heat and Temperature Rise of Cold Rolling[J], Metal Forming Technology, 1999,17(1):21-25.
[7]
黄光杰,王凌云.冷轧变形热及温升研究[J].金属成形工艺.1999,17(1):21-25.HUANG Guang-jie, WANG Ling-yun. Study on the Deformation Heat and Temperature Rise of Cold Rolling[J], Metal Forming Technology, 1999,17(1):21-25.
[8]
白振华.冷连轧机高速生产过程核心工艺数学模型[M].北京:机械工业出版社,2009.BAI Zhen-hua. Core Technology Mathematical Model in Cold Rolling Mill Speed Production Process[M]. Beijing: Machinery Industry Press.2009.
[8]
白振华.冷连轧机高速生产过程核心工艺数学模型[M].北京:机械工业出版社,2009.BAI Zhen-hua. Core Technology Mathematical Model in Cold Rolling Mill Speed Production Process[M]. Beijing: Machinery Industry Press.2009.
[9]
王鹏涛.Powell寻优法及其应用[J].系统工程理论与实践,1997,(9):63-67.WANG Peng-tao. Method of Powell Optimization with Applications[J]. Systems Engineering-Theory & Practice,1997,(9):63-67.
[9]
王鹏涛.Powell寻优法及其应用[J].系统工程理论与实践,1997,(9):63-67.WANG Peng-tao. Method of Powell Optimization with Applications[J]. Systems Engineering-Theory & Practice,1997,(9):63-67.
[10]
孙靖民,梁迎春.机械优化设计[M].北京:机械工业出版社,2010.SUN Jing-min, LIANG Ying-chun. Optimization of Mechanical Design[M].Beijing:Machinery Industry Press, 2010.
[10]
孙靖民,梁迎春.机械优化设计[M].北京:机械工业出版社,2010.SUN Jing-min, LIANG Ying-chun. Optimization of Mechanical Design[M].Beijing:Machinery Industry Press, 2010.