Experiment on the Sintering Proportioning Optimization
LIU Cheng-song1,2,LI Jing-she1,GAO Ya-wei1, 2,TANG Hai-yan1,2
1. State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing,Beijing 100083, China 2. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China
Abstract:Based on micro sintering experiments, the high temperature properties of six kinds of iron ores in a certain steel plant, such as the assimilation and liquid phase fluidity, were measured and compared, and their influencing factors were also analyzed. Then according to their high temperature properties, the ore matching principles were put forward and four groups of optimizing ore matching schemes were designed, based on which, sinter pot tests were carried out to verify the application of these schemes. Results show that, compared with the original ore blending scheme in the steel plant, better sinter production and quality as well as lower sintering cost were obtained by ore matching optimization and the feasibility of sintering proportioning optimization methods based on high temperature characteristics of the six types of iron ore fines were verified, which provides a theoretical basis and technical support for optimizing the sintering proportioning in this steel plant.
刘成松,李京社,高雅巍 ,唐海燕,. 铁矿粉烧结优化配矿的试验[J]. 钢铁, 2013, 48(10): 6-11.
LIU Cheng-song,,LI Jing-she,GAO Ya-wei, ,TANG Hai-yan,. Experiment on the Sintering Proportioning Optimization. Iron and Steel, 2013, 48(10): 6-11.