六辊冷连轧机中间辊横移过程辊间接触压力分析

doi:10.13228/j.boyuan.issn0449-749x.20160259

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (0 KB) HTML (0 KB)
输出: BibTeX | EndNote (RIS)

摘要为了使轧机板形控制性能适应带钢规格材质变化，用于连续轧制高档冷轧薄带钢的六辊冷连轧机大都采取中间辊可横移技术。但是，中间辊横移必定使辊间接触压力分布更不均匀，导致出现接触压力尖峰。在中间辊横移过程中，辊间接触压力和横移阻力都会随横移速度的变化而发生改变，并可能导致辊间接触压力在轧辊端部形成更大的压力尖峰，从而造成轧辊磨损不均匀并缩短轧辊的使用周期。通过建立有限元仿真模型，以仿真模拟获得中间辊横移过程中辊间接触压力的变化规律后，优化设计轧辊辊形，并且提出使用非对称弯辊力的方法，实现了辊间接触压力的分布均匀化，降低了辊间接触压力尖峰值，并延长了轧辊的使用寿命。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	陈剑
	黄涛
	李友荣
	熊勇

关键词 ：辊间接触压力, 横移速度, 辊形, 有限元, 磨损

Abstract：For high-grade cold-rolled steel strip continuous rolling six-high cold rolling mill，in order to make the strip flatness control performance to adapt to changes in material specifications，most of the intermediate rolls adapt the traverse technology. However，intermediate roll shift will make the contact pressure distribution between rolls more uneven，resulting in a contact pressure peak. During the roll shift process，the contact pressure between the rollers and the sliding resistance will change with the change of traverse speed，and may result in the contact pressure between rolls at the ends of the roll to form a larger pressure peak，wearing the rolls unevenly and shortening the life cycle of the roll. In the current study，a finite element simulation model was built to obtain the variation of contact pressure between rolls during the process of the intermediate roller traversing. The optimization design of roll shape and the use of asymmetric bending force method were proposed to achieve a uniform distribution of the inter-roll contact，reduce the contact pressure peak between rolls，and extend the service life of the roll.

收稿日期: 2016-06-16 出版日期: 2017-01-13

引用本文:

陈剑，黄涛，李友荣，熊勇. 六辊冷连轧机中间辊横移过程辊间接触压力分析[J]. 钢铁, 2017, 52(1): 43-46. CHEN Jian，HUANG Tao，LI You-rong，XIONG Yong. Analysis of contact pressure between rolls during intermediate roll shifting in 6-high cold rolling mills. Iron and Steel, 2017, 52(1): 43-46.

链接本文:

http://www.chinamet.cn/Jweb_gt/CN/10.13228/j.boyuan.issn0449-749x.20160259 或 http://www.chinamet.cn/Jweb_gt/CN/Y2017/V52/I1/43

[1]	V Boucly, D Nélias, I Green. Modeling of the Rolling and Sliding Contact between Two Asperities[J]. Journal of Tribology, 2007, 129(2): 235.
[1]	V Boucly, D Nélias, I Green. Modeling of the Rolling and Sliding Contact between Two Asperities[J]. Journal of Tribology, 2007, 129(2): 235.
[2]	张清东, 宫兆鸿, 李博. UC 冷轧机中间辊端部辊形设计研究[J]. 冶金设备, 2008, 172(6): 5-8.Zhang Qingdong, Palace Siu Hong, Li Bo UC roll cold rolling mill intermediate the ends of the roll-shaped design study [J] metallurgical equipment, 2008, 172 (6): 5-8.
[2]	张清东, 宫兆鸿, 李博. UC 冷轧机中间辊端部辊形设计研究[J]. 冶金设备, 2008, 172(6): 5-8.Zhang Qingdong, Palace Siu Hong, Li Bo UC roll cold rolling mill intermediate the ends of the roll-shaped design study [J] metallurgical equipment, 2008, 172 (6): 5-8.
[3]	曹建国, 张勇, 杨光辉, 等. UCM 六辊冷轧机中间辊辊形研究[J]. 中南大学学报: 自然科学版, 2011, 42(4): 966-971Cao Jianguo, Zhang Yong, Yang Guanghui, and other intermediate UCM six roller cold rolling mill roll shape [J]. Central South University: Natural Science Edition, 2011, 42 (4): 966-971.
[3]	曹建国, 张勇, 杨光辉, 等. UCM 六辊冷轧机中间辊辊形研究[J]. 中南大学学报: 自然科学版, 2011, 42(4): 966-971Cao Jianguo, Zhang Yong, Yang Guanghui, and other intermediate UCM six roller cold rolling mill roll shape [J]. Central South University: Natural Science Edition, 2011, 42 (4): 966-971.
[4]	刘宝权, 张鸿, 王自东, 等. UC 轧机中间辊非对称弯辊改善辊间压力分布[J]. 沈阳工业大学学报, 2013, 35(2).Liu Baoquan, chang hung, zi-dong wang, et al. The unsymmetrical bending of intermediate roll UC to improve the pressure distribution between rolls [J]. Journal of shenyang university of technology, 2013, 35 (2).
[4]	刘宝权, 张鸿, 王自东, 等. UC 轧机中间辊非对称弯辊改善辊间压力分布[J]. 沈阳工业大学学报, 2013, 35(2).Liu Baoquan, chang hung, zi-dong wang, et al. The unsymmetrical bending of intermediate roll UC to improve the pressure distribution between rolls [J]. Journal of shenyang university of technology, 2013, 35 (2).
[5]	魏立群, 郁建伟, 经晓蓉, 等. 六辊轧机辊间压力的计算[J]. 上海应用技术学院学报: 自然科学版, 2003, 3(3): 160-162.Wei Liqun, Yu Jianwei, the Xiaorong, computing among six roller mill roll pressure [J]. Shanghai Institute of Technology: Natural Science Edition, 2003, 3 (3): 160-162.
[5]	魏立群, 郁建伟, 经晓蓉, 等. 六辊轧机辊间压力的计算[J]. 上海应用技术学院学报: 自然科学版, 2003, 3(3): 160-162.Wei Liqun, Yu Jianwei, the Xiaorong, computing among six roller mill roll pressure [J]. Shanghai Institute of Technology: Natural Science Edition, 2003, 3 (3): 160-162.
[6]	梁勋国. 六辊冷连轧机板形控制模型优化的研究 [D]. 沈阳: 东北大学, 2009.Liang Xunguo. Six roll cold tandem mill strip shape control model optimization research [D]. Shenyang: northeastern university, 2009.
[6]	梁勋国. 六辊冷连轧机板形控制模型优化的研究 [D]. 沈阳: 东北大学, 2009.Liang Xunguo. Six roll cold tandem mill strip shape control model optimization research [D]. Shenyang: northeastern university, 2009.
[7]	Migual A.Cavaliere, Marcela B.Goldschmit, Eduardo N.Dvorkin. Finite Element Analysis of Steel Rolling Process[J]. Computer and Structures,2001(79):2075-2089
[7]	Migual A.Cavaliere, Marcela B.Goldschmit, Eduardo N.Dvorkin. Finite Element Analysis of Steel Rolling Process[J]. Computer and Structures,2001(79):2075-2089
[8]	曹金凤, 石亦平. ABAQUS 有限元分析常见问题解答[M]. 北京：机械工业出版社，2009：98~100.Cao Jinfeng, Dan Yiping ABAQUS finite element analysis FAQ [M] Beijing: Mechanical Industry Press, 2009: 98 to 100.
[8]	曹金凤, 石亦平. ABAQUS 有限元分析常见问题解答[M]. 北京：机械工业出版社，2009：98~100.Cao Jinfeng, Dan Yiping ABAQUS finite element analysis FAQ [M] Beijing: Mechanical Industry Press, 2009: 98 to 100.
[9]	庄茁, 由小川, 廖剑晖等. 基于 ABAQUS 的有限元分析和应用[M]. 北京：清华大学出版社,2009:287~294.Zhuang Zhuo You Xiaochuan Liao Jianhui, etc. based on ABAQUS finite element analysis and application [M] Beijing: Tsinghua University Press, 2009: 287 ~ 294.
[9]	庄茁, 由小川, 廖剑晖等. 基于 ABAQUS 的有限元分析和应用[M]. 北京：清华大学出版社,2009:287~294.Zhuang Zhuo You Xiaochuan Liao Jianhui, etc. based on ABAQUS finite element analysis and application [M] Beijing: Tsinghua University Press, 2009: 287 ~ 294.
[10]	吴海淼, 董建荣, 刘志民, 等. 轧辊磨损数学模型研究[J]. 润滑与密封, 2009, 34(8): 53-57.Wu Haimiao Dong Jianrong, zhi-min liu, et al. Research on mathematics model of roll wear [J]. Lubrication and sealing, 2009, 34 (8) : 53-57.
[10]	吴海淼, 董建荣, 刘志民, 等. 轧辊磨损数学模型研究[J]. 润滑与密封, 2009, 34(8): 53-57.Wu Haimiao Dong Jianrong, zhi-min liu, et al. Research on mathematics model of roll wear [J]. Lubrication and sealing, 2009, 34 (8) : 53-57.
[11]	李维刚. 热轧轧辊磨损模型研究及轧辊横移影响分析[J]. 武汉科技大学学报: 自然科学版, 2013, 36(2): 98-103.Li Wei-gang. Study on the hot rolling roll wear model and roll transverse impact analysis [J]. Journal of wuhan university of science and technology: natural science edition, 2013, 36 (2) : 98-103.
[11]	李维刚. 热轧轧辊磨损模型研究及轧辊横移影响分析[J]. 武汉科技大学学报: 自然科学版, 2013, 36(2): 98-103.Li Wei-gang. Study on the hot rolling roll wear model and roll transverse impact analysis [J]. Journal of wuhan university of science and technology: natural science edition, 2013, 36 (2) : 98-103.