Effect of Cu on continuous cooling transformation of medium carbon Si-Mn steel
AN Zhi-guo1,MENG Yan-jun2, SHI Yuan1, LI Jian-chao2, SUN Xiao-ran1, SUN Yan1
(1. Technology Research Institute, Hesteel Group, Shijiazhuang 050023, Hebei, China 2. Department of Materials Engineering, Hebei College of Industry and Technology, Shijiazhuang 050091, Hebei, China)
Abstract:In order to understand phase transformation of Cu-containing medium carbon Si-Mn steel,the effect of Cu on microstructures and micro-hardness of medium carbon Si-Mn steel at different cooling rates were investigated by a DIL805L thermal dilatometer. The Cu-rich precipitates were analyzed by high resolution transmission electron microscope. The results show that Cu could prolong bainite ncubation period, reduce bainite and martensite starting transformation temperature. During continuous cooling transformation,The Cu-rich particles dispersive precipitate in the ferrite and refine ferrite grain. The micro-hardness of copper bearing medium carbon Si-Mn steel increased with the cooling rate increase when the cooling rate was lower than 21 ℃/s. The content of Cu-rich particles increased with the increase of cooling rate,meanwhile the bainite and martensite also increased. Instead,Cu can lower the micro-hardness of bainite and martensite in the steel when the cooling rate was higher than 21 ℃/s.
安治国,孟延军,史 远,李建朝,孙晓冉,孙 岩. 铜对中碳硅锰钢连续冷却相变的影响[J]. , 2017, 52(12): 80-85.
AN Zhi-guo,MENG Yan-jun, SHI Yuan, LI Jian-chao, SUN Xiao-ran, SUN Yan. Effect of Cu on continuous cooling transformation of medium carbon Si-Mn steel. Iron and Steel, 2017, 52(12): 80-85.
Larrabee C P,Coburn S K.The atmospheric corrosion of steels as influenced by changes in chemical composition[J].First International Congress on Metallic Corrosion. London, 1961, :276-285
Larrabee C P,Coburn S K.The atmospheric corrosion of steels as influenced by changes in chemical composition[J].First International Congress on Metallic Corrosion. London, 1961, :276-285
HUANG Zhi-tao, LENG Wen-xiu, TIAN Wen-huai.Effect of aging time on the mechanical properties of Fe-Cu binary alloys[J].Rare Metal Materials and Engineering, 2013, 42(S2):565-
HUANG Zhi-tao, LENG Wen-xiu, TIAN Wen-huai.Effect of aging time on the mechanical properties of Fe-Cu binary alloys[J].Rare Metal Materials and Engineering, 2013, 42(S2):565-
Ghosh A, Chatterjee S, Mishra B, et al.Microstructure,properties,and age hardening behavior of a thermomechanically processed ultralow-carbon cu-bearing high-strength steel[J].Metallurgical and Materials Transactions A, 2005, 36(3):703-
[8]
Ghosh A, Chatterjee S, Mishra B, et al.Microstructure,properties,and age hardening behavior of a thermomechanically processed ultralow-carbon cu-bearing high-strength steel[J].Metallurgical and Materials Transactions A, 2005, 36(3):703-
Dhua S K, Ray A, Sarma D S.Effect of tempering temperatures on the mechanical properties and microstructures of HSLA-100 type copper-bearing steels[J].Materials Science & Engineering A, 2001, 318(1):197-
[11]
Dhua S K, Ray A, Sarma D S.Effect of tempering temperatures on the mechanical properties and microstructures of HSLA-100 type copper-bearing steels[J].Materials Science & Engineering A, 2001, 318(1):197-