“One Ladle Technology” operation practice analysis in Shougang Jingtang
SHI Xin-yue1,HAN Wei-gang2,LI Xiu-ping1,ZHANG Chun-xia1,WU Chong-yuan3,WEI Zhi-jun3
(1. State Key Laboratory of Advanced Steel Processing and Products, Central Iron and Steel Research Institute, Beijing 100081, China 2. College of Metallurgy and Energy, North China University of Science and Technology, Tangshan 063210, Hebei, China 3. Manufactor Sector, Shougang Jingtang United Iron and Steel Co., Ltd., Tangshan 063200, Hebei, China)
Abstract:“One Ladle Technology” mode is more advanced operation mode in BF-BOF section. OLT,which has a significant advantage in area occupying,equipment investment,staffing and operation time,temperature drop of hot metal and dust emission compared with other models,has been gradually accepted and applied in steel production enterprises. Based on the case study of BF and BOF section “One Ladle Technology” in Shougang Jingtang,operation mode in time and HML turnover time,temperature drop of full HML and empty HML are analyzed. Based on the results,the dynamic operating rules for HML turnover are put forward which has achieved remarkable results in Shougang Jingtang.
殷瑞钰.冶金流程工程学(第2版)[M].北京:冶金工业出版社,2009.(YIN Rui-yu. Metallurgical Process Engineering (Version 2)[M]. Beijing: Metallurgical Industry Press, 1990.)
[1]
殷瑞钰.冶金流程工程学(第2版)[M].北京:冶金工业出版社,2009.(YIN Rui-yu. Metallurgical Process Engineering (Version 2)[M]. Beijing: Metallurgical Industry Press, 1990.)
[2]
邱剑,田乃媛.典型流程区段炼铁炼钢界面的比较优势研究[J].北京科技大学学报,2005,27(6):740-744. (QIU Jian,TIAN Nai-yuan. Research on the Comparative Advantage of Iron and Steel Interface in Typical Process Section[J]. Journal of USTB,2005,27(6):740-744.)
[2]
邱剑,田乃媛.典型流程区段炼铁炼钢界面的比较优势研究[J].北京科技大学学报,2005,27(6):740-744. (QIU Jian,TIAN Nai-yuan. Research on the Comparative Advantage of Iron and Steel Interface in Typical Process Section[J]. Journal of USTB,2005,27(6):740-744.)
[3]
张龙强,田乃媛,徐安军.新一代大型钢厂高炉-转炉界面模式研究[J].中国冶金,2007,17(11):29-34. (ZHANG Long-qiang,TIAN Nai-yuan,XU An-jun. Research on BF-BOF Interface Model of New Generation Large Steel Plant[J]. China Metallurgy,2007,17(11):29-34.)
[3]
张龙强,田乃媛,徐安军.新一代大型钢厂高炉-转炉界面模式研究[J].中国冶金,2007,17(11):29-34. (ZHANG Long-qiang,TIAN Nai-yuan,XU An-jun. Research on BF-BOF Interface Model of New Generation Large Steel Plant[J]. China Metallurgy,2007,17(11):29-34.)
[4]
杜涛,蔡九菊,李亚军,等.炼铁-炼钢界面温降与节能模式分析[J].钢铁,2008, 43(12):83-86.(DU Tao, CAI Jiu-ju, LI Ya-jun, et al. Analysis of Hot Metal Temperature Drop and Energy-Saving Mode on Themo-Interface of BF-BOF Route[J]. Iron and Steel, 2008, 43(12):83-86.)
[4]
杜涛,蔡九菊,李亚军,等.炼铁-炼钢界面温降与节能模式分析[J].钢铁,2008, 43(12):83-86.(DU Tao, CAI Jiu-ju, LI Ya-jun, et al. Analysis of Hot Metal Temperature Drop and Energy-Saving Mode on Themo-Interface of BF-BOF Route[J]. Iron and Steel, 2008, 43(12):83-86.)
[5]
赵东明,孙宏武,唐小葳.鞍钢朝阳2600m3高炉采用的新技术[J].炼铁, 2009, 28(6):10-13. (ZHAO Dong-ming,SUN Hong-wu,TANG Xiao-wei. New Technology Adopted in 2600m3 Blast Furnace in Anshan steel[J]. Ironmaking, 2009, 28(6):10-13.)
[5]
赵东明,孙宏武,唐小葳.鞍钢朝阳2600m3高炉采用的新技术[J].炼铁, 2009, 28(6):10-13. (ZHAO Dong-ming,SUN Hong-wu,TANG Xiao-wei. New Technology Adopted in 2600m3 Blast Furnace in Anshan steel[J]. Ironmaking, 2009, 28(6):10-13.)
[6]
吕冬瑞,田乃媛,徐安军,等.宣钢取消混铁炉可行性分析[J].钢铁研究.2006,(5):33-35. (LV Dong-rui, TIAN Nai-yuan,XU An-jun, et al. Feasibility Analysis of Canceling Mixed Iron Furnace in Xuanhua steel[J]. Research on Iron and Steel.2006,(5):33-35.)
[6]
吕冬瑞,田乃媛,徐安军,等.宣钢取消混铁炉可行性分析[J].钢铁研究.2006,(5):33-35. (LV Dong-rui, TIAN Nai-yuan,XU An-jun, et al. Feasibility Analysis of Canceling Mixed Iron Furnace in Xuanhua steel[J]. Research on Iron and Steel.2006,(5):33-35.)
[7]
邱剑,田乃媛,刘茂林,等.宝钢制造业流程铁钢界面物流参数的解析[J].北京科技大学学报,2004,26(2):197-201. (QIU Jian,TIAN Nai-yuan,LIU Mao-lin, et al. Analysis of Iron and Steel Interface Logistics Parameters in Baosteel[J]. Journal of USTB, 2004, 26(2):197-201.)
[7]
邱剑,田乃媛,刘茂林,等.宝钢制造业流程铁钢界面物流参数的解析[J].北京科技大学学报,2004,26(2):197-201. (QIU Jian,TIAN Nai-yuan,LIU Mao-lin, et al. Analysis of Iron and Steel Interface Logistics Parameters in Baosteel[J]. Journal of USTB, 2004, 26(2):197-201.)
[8]
陈红,方丽华,孙小跃,等.昆钢新区“一罐到底”工艺方案选择分析[J].钢铁,2013, 48(12):85-90. (CHEN Hong,FANG Li-hua,SUN Xiao-yue, et al. Analysis of “One Ladle Technology”Process Scheme in Kun steel[J]. IRON AND STEEL, 2013, 48(12):85-90.)
[8]
陈红,方丽华,孙小跃,等.昆钢新区“一罐到底”工艺方案选择分析[J].钢铁,2013, 48(12):85-90. (CHEN Hong,FANG Li-hua,SUN Xiao-yue, et al. Analysis of “One Ladle Technology”Process Scheme in Kun steel[J]. IRON AND STEEL, 2013, 48(12):85-90.)
[9]
任彦军,王家伟,张晓兵.沙钢铁钢界面“一包到底”生产实践[J].炼铁, 2012,(2):31-34. (REN Yan-jun, WANG Jia-wei, ZHANG Xiao-bing. Production Practice of "One Ladle Technology” in the BF-BOF interface in Sha Steel[J]. Ironmaking, 2012,(2):31-34.)
[9]
任彦军,王家伟,张晓兵.沙钢铁钢界面“一包到底”生产实践[J].炼铁, 2012,(2):31-34. (REN Yan-jun, WANG Jia-wei, ZHANG Xiao-bing. Production Practice of "One Ladle Technology” in the BF-BOF interface in Sha Steel[J]. Ironmaking, 2012,(2):31-34.)
[10]
杨玻,董荣华,刘浏,等.重钢铁钢界面“一罐制”技术的研究与应用[C].全国炼钢-连铸生产技术会,2012:17-21.(YANG Bo,DONG Rong-hua,LIU Liu, et al. Research and Application of “One Ladle Technology” for Interfacing of BF-BOF in Chongqing Steel[C]. National Steelmaking - Continuous Casting Production Technology Conference, 2012:17-21.)
[10]
杨玻,董荣华,刘浏,等.重钢铁钢界面“一罐制”技术的研究与应用[C].全国炼钢-连铸生产技术会,2012:17-21.(YANG Bo,DONG Rong-hua,LIU Liu, et al. Research and Application of “One Ladle Technology” for Interfacing of BF-BOF in Chongqing Steel[C]. National Steelmaking - Continuous Casting Production Technology Conference, 2012:17-21.)