Influence of Nb and V on recrystallization of high-strength steel bars and design of rolling process
PU Chun-lei1,2, LIN Yin-he1,2, YIN Guo-liang3, TIAN Ye2, CHENG Xiang-kui2, FANG Shi-nian2
1. International Research Institute of Vanadium and Titanium, Panzhihua University, Panzhihua 617000, Sichuan, China; 2. Intelligent Development Department, MCC Huatian Engineering and Technology Corporation, Nanjing 210019, Jiangsu, China; 3. Chemistry and Chemical Engineering College, Yibin University, Yibin 644007, Sichuan, China
Abstract：In order to study and design the quantitative control of the recrystallization behavior of the austenite region during the rolling process of high-strength steel bars after adding niobium and vanadium,the Gleeble-3500 thermal simulator was adopted to conduct uniaxial hot compression tests on niobium and vanadium microalloyed high-strength rebars. Based on the thermodynamic principle of the critical condition of recrystallization,the Avrami equation was used to obtain the recrystallization kinetic curve under different deformation conditions through the analysis of the stress-strain curve under different deformation conditions. And the niobium is quantitatively compared and analyzed according to the recrystallization kinetic curve. The effect of vanadium microalloying on the beginning,transformation,and end process of recrystallization of high-strength rebar was studied carefully. The results showed that the hot compression process of niobium and vanadium microalloyed rebars showed obvious characteristics of dynamic recrystallization. The addition of microalloying elements Nb/Nb+V hindered the dynamic recrystallization of 20MnSi steel and increased the deformation temperature. Or an increase in strain rate can promote recrystallization. Rolling Process design was carried out for the use of dynamic recrystallization and organization control in production. The calculations indicated cooling and recovery could be carried out before the finished stand in the finishing mill to ensure the recrystallization fraction(95%),where the temperature was around 830 ℃.
蒲春雷, 林银河, 尹国亮, 田野, 程相魁, 方实年. 铌、钒对高强钢筋再结晶影响及轧制工艺设计[J]. 钢铁, 2021, 56(10): 146-151.
PU Chun-lei, LIN Yin-he, YIN Guo-liang, TIAN Ye, CHENG Xiang-kui, FANG Shi-nian. Influence of Nb and V on recrystallization of high-strength steel bars and design of rolling process[J]. Iron and Steel, 2021, 56(10): 146-151.
[1] 郭军,陈锋,肖寄光,等. 新标准下热轧带肋钢筋生产工艺的分析[J]. 中国冶金,2019,29(9):68. (GUO Jun,CHEN Feng,XIAO Ji-guang,et al. Analysis of production technology of hot rolled ribbed bars under new standard[J]. China Metallurgy,2019,29(9):68.) [2] 张向军,方实年,卢勇,等. 新国标下螺纹钢筋的生产实践及问题分析[J]. 钢铁钒钛,2020,41(1):165.(ZHANG Xiang-jun,FANG Shi-nian,LU Yong,et al. Green production practice and problem analysis of rebars under newly issued national standard[J]. Iron Steel Vanadium Titanium,2020,41(1):165.) [3] 黄宝,邢娜,何立波. 我国特殊用途钢筋的发展现状和生产技术[J]. 上海金属,2016,38(3):58. (HUANG Bao,XING Na,HE Li-bo. Technology of special reinforcement in China[J]. Shanghai Metals,2016,38(3):58.) [4] 王培文,赵新华,王中学,等. 屈服强度600 MPa级及以上热轧带肋钢筋国内外标准综述[J]. 轧钢,2019,36(5):63.(WANG Pei-wen,ZHAO Xin-hua,WANG Zhong-xue,et al. Summary of domestic and foreign standards for hot rolled ribbed bars with yield strength of 600 MPa and above[J]. Steel Rolling,2019,36(5):63.) [5] 杨晓伟,周云,陈焕德,等. 钛微合金化HRB400E钢筋组织性能及强化机理[J]. 中国冶金,2020,30(1):68. (YANG Xiao-wei,ZHOU Yun,CHEN Huan-de,et al. Microstructure and strengthening mechanisms of Ti microalloyed HRB400E rebar[J]. China Metallurgy,2020,30(1):68.) [6] 翁宇庆. 超细晶钢——钢的组织细化理论与控制技术[M]. 北京:冶金工业出版社,2003.(WENG Yu-qing. Ultrafine Grain Steel—Steel Structure Refinement Theory and Control Technology[M]. Beijing:Metallurgical Industry Press,2003.) [7] 闫洞旭,方实年,蒲春雷,等. 高强钢筋热压缩过程的本构分析及有限元模拟[J]. 中国冶金,2021,31(3):50. (YAN Dong-xu,FANG Shi-nian,PU Chun-lei,et al. Constitutive analysis and finite element simulation of high-strength rebar during hot compression process[J]. China Metallurgy,2021,31(3):50.) [8] 林慧国,傅代直. 钢的奥氏体转变曲线[M]. 北京:机械工业出版社,1988.(LIN Hui-guo,FU Dai-zhi. Austenitic Transformation Curve of Steel[M]. Beijing:China Machine Press,1988.) [9] 杨伟勇,陈永峰,陶群南,等. 600 MPa抗震钢筋条带状异常组织的分析与控制[J]. 钢铁研究学报,2020,32(11):1014. (YANG Wei-yong,CHEN Yong-feng,TAO Qun-nan,et al. Analysis and control of abnormal band-like structure of 600 MPa seismic reinforcement steel reabr[J]. Journal of Iron and Steel Research,2020,32(11):1014.) [10] 蔡珍,韩斌,谭文,等. 钛微合金化技术发展现状[J]. 中国冶金,2015,25(2):1.(CAI Zhen,HAN Bin,TAN Wen,et al. Development status of titanium microalloying technology[J]. China Metallurgy,2015,25(2):1.) [11] HUANG Min,CAO Jian-chun,ZHOU Xiao-long. Effects of deformation conditions on dynamic recrystallization of a Nb microalloyed anti-seismic rebar[J]. Journal of Donghua University(English Edition),2015,32(5):879. [12] 蔡伟,金梁,毛俊春,等. 不同上冷床温度对螺纹钢组织性能的影响[J]. 钢铁,2020,55(12):92. (CAI Wei,JIN Liang,MAO Jun-chun,et al. Impact of different temperatures of deformed steel bar on cooling bed on performance of microstructure[J]. Iron and Steel,2020,55(12):92.) [13] PANG Gan-yun,ZHANG Jia-mou,ZHANG Hong-tao,et al. The relationship of microstructure and mechanical properties of hot rolled Nb-microalloyed high strength rebar steel[C]//Proceedings of the Joint International Conference of HSLA Steels 2005 and ISUGS 2005. Beijing:The Chinese Society for Metals,2005:355. [14] 梁龙飞. 铌微合金化HRB400热轧带肋钢筋的研制[J]. 钢铁研究,2002(3):42.(LIANG Long-fei. Development of Niobium microalloyed HRB400 hot rolled ribbed steel bar[J]. Research on Iron and Steel,2002(3):42.) [15] 郝飞翔,傅余东,严明,等. Nb微合金化HRB400E钢筋的试制[J]. 轧钢,2020,37(3):101.(HAO Fei-xiang,FU Yu-dong,YAN Ming,et al. Trial production of niobium microalloyed HRB400E ribbed bar[J]. Steel Rolling,2020,37(3):101.) [16] 赵贤平,邓深,余轶峰,等. 铌微合金化HRB400E高强钢筋CCT曲线测定及应用[J]. 中国冶金,2019,29(8):58. (ZHAO Xian-ping,DENG Shen,YU Yi-feng,et al. Measurement and application of CCT curve of Nb microalloyed HRB400E high-strength rebar[J]. China Metallurgy,2019,29(8):58.) [17] 吴晋彬,刘国权,王浩. Nb,Ti和V对含Nb微合金钢热变形行为的影响[J]. 金属学报,2010,46(7):838.(WU Jin-bin,LIU Guo-quan,WANG Hao. Effect of Nb,Ti and V on the hot deformation behavior of Nb-containing microalloyed steel[J]. Acta Metallurgica Sinica,2010,46(7):838.) [18] Jonas J J,Quelennec X,Jiang L,et al. The avrami kinetics of dynamic recrystallization[J]. Acta Materialia,2009,57(9):2748. [19] Poliak E I,Jonas J J. A one-parameter approach to determining the critical conditions for the initiation of dynamic recrystallization[J]. Acta Materialia,1996,44(1):127. [20] 周晓光,刘振宇,吴迪,等. FTSR热轧含Nb钢动态再结晶数学模型中参数的确定[J]. 金属学报,2008(10):1188.(ZHOU Xiao-guang,LIU Zhen-yu,WU Di,et al. Determination of parameters in the mathematical model of dynamic recrystallization of FTSR hot rolled Nb steel[J]. Acta Metallurgica Sinica,2008(10):1188.) [21] 李敏娜. 高强钢筋低温热变形行为研究[D]. 西安:西安建筑科技大学,2016.(LI Min-na. Research on Low Temperature Thermal Deformation Behavior of High Strength Rebar[D]. Xi'an:Xi'an University of Architecture and Technology,2016.)
2021, Vol. 56 
