|
|
Research progress on ultra-long-life fatigue properties of steel and its influencing factors |
ZHANG Zhi-jun1,2,HE Bo-lin1,2,LI Li1,2 |
1. School of Mechanical and Electrical Engineering, East China Jiaotong University, Nanchang 330013,Jiangxi,China 2. Key Laboratory for Conveyance and Equipment of Ministry of Education, East China Jiaotong University, Nanchang 330013,Jiangxi,China |
|
|
Abstract In the modern industry, many steel structures are required to bear the fatigue load more than 108 cycles, so the research of ultra-long-life fatigue properties of steel has become a hot-spot in the research of the fatigue field. The research status and progress on fatigue properties of steel in ultra-long-life regime and its influencing factors are reviewed in this paper, which mainly introduced the S-N curves, the mechanism of crack initiation and propagation, and several impact factors of ultra-long-life fatigue of steel. Besides, several points which need further research on ultra-long-life fatigue of steel are put forward to provide a reference for the current research.
|
Received: 12 April 2016
Published: 08 October 2016
|
|
|
|
|
[1] |
Natio T, Ueda H, Kikuchi M. Observation of Fatigue Fracture Surface of Carburized Steel[J]. Journal of the Society of Materials Science, Japan. 1983, 32(361): 1162-1166.
|
[1] |
Natio T, Ueda H, Kikuchi M. Observation of Fatigue Fracture Surface of Carburized Steel[J]. Journal of the Society of Materials Science, Japan. 1983, 32(361): 1162-1166.
|
[2] |
黄志勇,王清远.低铬合金钢的超高周疲劳行为和裂纹扩展路径分析[J].四川大学学报:工程科学版, 2012, 44(5):195-199.
|
[2] |
黄志勇,王清远.低铬合金钢的超高周疲劳行为和裂纹扩展路径分析[J].四川大学学报:工程科学版, 2012, 44(5):195-199.
|
[3] |
张海威,何宇廷,程礼,等.钛合金超高周疲劳性能试验研究[J].航空材料学报,2013,33(3):92-96.
|
[3] |
张海威,何宇廷,程礼,等.钛合金超高周疲劳性能试验研究[J].航空材料学报,2013,33(3):92-96.
|
[4] |
Wei K, He B L. Failure Mechanism of Very High Cycle Fatigue for High Strength Steels[J]. Key Engineering Materials, 2015, 664:275-281.
|
[4] |
Wei K, He B L. Failure Mechanism of Very High Cycle Fatigue for High Strength Steels[J]. Key Engineering Materials, 2015, 664:275-281.
|
[5] |
W. J. Hui, C. Zhou, Y. J. Zhang, et al. Very high cycle fatigue properties of high-strength spring steel 60SiCrV7[J]. Fatigue & Fracture of Engineering Materials & Structures, 2016,00:1-11.
|
[5] |
W. J. Hui, C. Zhou, Y. J. Zhang, et al. Very high cycle fatigue properties of high-strength spring steel 60SiCrV7[J]. Fatigue & Fracture of Engineering Materials & Structures, 2016,00:1-11.
|
[6] |
Shiozawa K, Lu L, Ishihara S. S-N curve characteristics and subsurface crack initiation behaviour in ultra-long life fatigue of a high carbon chromium bearing steel [J]. Fatigue Fracture Engineering Materials Structures,2001(24):781-790.
|
[6] |
Shiozawa K, Lu L, Ishihara S. S-N curve characteristics and subsurface crack initiation behaviour in ultra-long life fatigue of a high carbon chromium bearing steel [J]. Fatigue Fracture Engineering Materials Structures,2001(24):781-790.
|
[7] |
Shiozawa K, Hasegawa T, Kashiwagi Y. Veiy high cycle fatigue properties of bearing steel under axial loading condition[J]. International Journal of Fatigue, 2009,31:880-888.
|
[7] |
Shiozawa K, Hasegawa T, Kashiwagi Y. Veiy high cycle fatigue properties of bearing steel under axial loading condition[J]. International Journal of Fatigue, 2009,31:880-888.
|
[8] |
李永德, 杨振国, 李守新,等. GCr15轴承钢超高周疲劳性能与夹杂物相关性[J]. 金属学报, 2008, 44(8):968-972.
|
[8] |
李永德, 杨振国, 李守新,等. GCr15轴承钢超高周疲劳性能与夹杂物相关性[J]. 金属学报, 2008, 44(8):968-972.
|
[9] |
L. T. L U, Zhang J W, Shiozawa K. Influence of inclusion size on S‐N curve characteristics of high-strength steels in the giga-cycle fatigue regime[J]. Fatigue & Fracture of Engineering Materials & Structures, 2009, 32(32):647-655.
|
[9] |
L. T. L U, Zhang J W, Shiozawa K. Influence of inclusion size on S‐N curve characteristics of high-strength steels in the giga-cycle fatigue regime[J]. Fatigue & Fracture of Engineering Materials & Structures, 2009, 32(32):647-655.
|
[10] |
鲁连涛,盐泽和章. 高速工具钢的超长寿命S-N曲线特征和内部裂纹萌生行为[J]. 机械工程学报, 2006, 42(12):89-94.
|
[10] |
鲁连涛,盐泽和章. 高速工具钢的超长寿命S-N曲线特征和内部裂纹萌生行为[J]. 机械工程学报, 2006, 42(12):89-94.
|
[11] |
胡燕慧, 张峥, 钟群鹏,等. 金属材料超高周疲劳研究进展[J]. 机械强度, 2009, 31(06):979-985.
|
[11] |
胡燕慧, 张峥, 钟群鹏,等. 金属材料超高周疲劳研究进展[J]. 机械强度, 2009, 31(06):979-985.
|
[12] |
Wang Q Y, Berard J Y, Rathery S, et al. High-cycle fatigue crack initiation and propagation behavior of high-strength spring steel wires[J]. Fatigue & Fracture of Engineering Materials & Structures, 1999, 22(8): 673-677.
|
[12] |
Wang Q Y, Berard J Y, Rathery S, et al. High-cycle fatigue crack initiation and propagation behavior of high-strength spring steel wires[J]. Fatigue & Fracture of Engineering Materials & Structures, 1999, 22(8): 673-677.
|
[13] |
Marines-Garcia I, Paris P C, Tada H, et al. Fatigue crack growth from small to long cracks in VHCF with surface initiations[J]. International Journal of Fatigue, 2007, 29(9): 2072-2078.
|
[13] |
Marines-Garcia I, Paris P C, Tada H, et al. Fatigue crack growth from small to long cracks in VHCF with surface initiations[J]. International Journal of Fatigue, 2007, 29(9): 2072-2078.
|
[14] |
Bathias. There is no infinite fatigue life in metallic materials[J]. Fatigue & Fracture of Engineering Materials & Structures, 1999, 22(7):559–565.
|
[14] |
Bathias. There is no infinite fatigue life in metallic materials[J]. Fatigue & Fracture of Engineering Materials & Structures, 1999, 22(7):559–565.
|
[15] |
Yao J, Qu X H, He X B, et al. Effect of inclusion size on the high cycle fatigue strength and failure mode of a high V alloyed powder metallurgy tool steel[J]. International Journal of Minerals Metallurgy & Materials, 2012, 19(7):608-614.
|
[15] |
Yao J, Qu X H, He X B, et al. Effect of inclusion size on the high cycle fatigue strength and failure mode of a high V alloyed powder metallurgy tool steel[J]. International Journal of Minerals Metallurgy & Materials, 2012, 19(7):608-614.
|
[16] |
Zhao H M, Hui W J, Nie Y H, et al. Effect of Inclusion Size on High-Cycle Fatigue Behavior of High Strength Spring Steel[J]. Iron & Steel, 2008,43(5):66-70.
|
[16] |
Zhao H M, Hui W J, Nie Y H, et al. Effect of Inclusion Size on High-Cycle Fatigue Behavior of High Strength Spring Steel[J]. Iron & Steel, 2008,43(5):66-70.
|
[17] |
Chao, He. Very high cycle fatigue behavior of bridge steel welded joint[J]. 力学快报(英文版), 2012, 2(03):36-40.
|
[18] |
刘龙隆. 25Cr2Ni2MoV钢焊接接头的超高周疲劳行为研究[D]. 华东理工大学, 2014.
|
[17] |
Chao, He. Very high cycle fatigue behavior of bridge steel welded joint[J]. 力学快报(英文版), 2012, 2(03):36-40.
|
[19] |
Xu X X, Yu Y, Cui W L, et al. Ultra-high cycle fatigue behavior of high strength steel with carbide-free bainite/martensite complex microstructure[J]. 矿物冶金与材料学报:英文版, 2009, 16(3):285-292.
|
[18] |
刘龙隆. 25Cr2Ni2MoV钢焊接接头的超高周疲劳行为研究[D]. 华东理工大学, 2014.
|
[19] |
Xu X X, Yu Y, Cui W L, et al. Ultra-high cycle fatigue behavior of high strength steel with carbide-free bainite/martensite complex microstructure[J]. 矿物冶金与材料学报:英文版, 2009, 16(3):285-292.
|
[20] |
Murakami Y, YokoyamaN N, Nagata J. Mechanism of fatigue failure in ultra-long life regime [J]. Fatigue & Fracture of Engineering Materials & Structures, 2002, 25(8-9):735-746.
|
[20] |
Murakami Y, YokoyamaN N, Nagata J. Mechanism of fatigue failure in ultra-long life regime [J]. Fatigue & Fracture of Engineering Materials & Structures, 2002, 25(8-9):735-746.
|
[21] |
Sakai T, Sato Y, Oguma N. Characteristic S-N properties of high-carbon-chromium-bearing steel under axial loading in long-life fatigue[J]. Fatigue & Fracture of Engineering Materials & Structures, 2002, 25(8-9):765-773.
|
[21] |
Sakai T, Sato Y, Oguma N. Characteristic S-N properties of high-carbon-chromium-bearing steel under axial loading in long-life fatigue[J]. Fatigue & Fracture of Engineering Materials & Structures, 2002, 25(8-9):765-773.
|
[22] |
Paris P C, Erdogan F. A critical analysis of crack propagation laws[J]. Journal of Fluids Engineering, 1963, 85(4): 528-533.
|
[22] |
Paris P C, Erdogan F. A critical analysis of crack propagation laws[J]. Journal of Fluids Engineering, 1963, 85(4): 528-533.
|
[23] |
Tanaka K, Akiniwa Y. Fatigue crack propagation behaviour derived from S-N data in very high cycle regime[J]. Fatigue & Fracture of Engineering Materials & Structures, 2002, 25(8-9):775–784.
|
[23] |
Tanaka K, Akiniwa Y. Fatigue crack propagation behaviour derived from S-N data in very high cycle regime[J]. Fatigue & Fracture of Engineering Materials & Structures, 2002, 25(8-9):775–784.
|
[24] |
Li W, Sakai T, Li Q, et al. Reliability evaluation on very high cycle fatigue property of GCr15 bearing steel[J]. International Journal of Fatigue, 2010, 32(7):1096-1107.
|
[24] |
Li W, Sakai T, Li Q, et al. Reliability evaluation on very high cycle fatigue property of GCr15 bearing steel[J]. International Journal of Fatigue, 2010, 32(7):1096-1107.
|
[25] |
Murakami Y. Analysis of stress intensity factors of modes I, II and III for inclined surface cracks of arbitrary shape[J]. Engineering Fracture Mechanics, 1985, 22(1):101-114.
|
[25] |
Murakami Y. Analysis of stress intensity factors of modes I, II and III for inclined surface cracks of arbitrary shape[J]. Engineering Fracture Mechanics, 1985, 22(1):101-114.
|
[26] |
倪金刚.超声疲劳试验技术的应用[J].航空动力学报,1995,10(3):245-248.
|
[26] |
倪金刚.超声疲劳试验技术的应用[J].航空动力学报,1995,10(3):245-248.
|
[27] |
Roth L D, Willertz L E, Leax T R. On the fatigue of copper up to ultrasonic frequencies[J]. Ultrasonic Fatigue, 1981: 265-282.
|
[27] |
Roth L D, Willertz L E, Leax T R. On the fatigue of copper up to ultrasonic frequencies[J]. Ultrasonic Fatigue, 1981: 265-282.
|
[28] |
kikukawa M., K. Oji and K. Ogura, Trans JSME, 32(1966): 36-370.
|
[28] |
kikukawa M., K. Oji and K. Ogura, Trans JSME, 32(1966): 36-370.
|
[29] |
Kikukawa M., K.Oji and K.Ogura,Trans JSME,32(1966):875-879.
|
[29] |
Kikukawa M., K.Oji and K.Ogura,Trans JSME,32(1966):875-879.
|
[30] |
李伟, 李强, 鲁连涛,等. 不同加载频率下GCr15钢超高周疲劳行为的研究[J]. 材料热处理学报, 2008,29(6):53-57.
|
[30] |
李伟, 李强, 鲁连涛,等. 不同加载频率下GCr15钢超高周疲劳行为的研究[J]. 材料热处理学报, 2008,29(6):53-57.
|
[31] |
薛红前,杨斌堂等. 高频载荷下高强钢的超高周疲劳及热耗散研究[J]. 材料工程, 2009, 30(3):49-53.
|
[31] |
薛红前,杨斌堂等. 高频载荷下高强钢的超高周疲劳及热耗散研究[J]. 材料工程, 2009, 30(3):49-53.
|
[32] |
王弘,高庆. 超声疲劳试验中载荷频率对材料疲劳性能的影响[J]. 理化检验:物理分册, 2005, 41(9):433-435.
|
[32] |
王弘,高庆. 超声疲劳试验中载荷频率对材料疲劳性能的影响[J]. 理化检验:物理分册, 2005, 41(9):433-435.
|
[33] |
Nakajima M, Tokaji K, Itoga H, et al. Morphology of step-wise S–N curves depending on work-hardened layer and humidity in a high-strength steel[J]. Fatigue & Fracture of Engineering Materials & Structures, 2003, 26(12):1113–1118.
|
[33] |
Nakajima M, Tokaji K, Itoga H, et al. Morphology of step-wise S–N curves depending on work-hardened layer and humidity in a high-strength steel[J]. Fatigue & Fracture of Engineering Materials & Structures, 2003, 26(12):1113–1118.
|
[34] |
钱桂安, 洪友士. 环境介质对40Cr结构钢高周和超高周疲劳行为的影响[J]. 金属学报, 2009, 45(11):1356-1363.
|
[34] |
钱桂安, 洪友士. 环境介质对40Cr结构钢高周和超高周疲劳行为的影响[J]. 金属学报, 2009, 45(11):1356-1363.
|
[35] |
张彭一.不同介质环境下马氏体不锈钢2Cr13钢的超高周疲劳研究[D]. 兰州理工大学, 2014.
|
[35] |
张彭一.不同介质环境下马氏体不锈钢2Cr13钢的超高周疲劳研究[D]. 兰州理工大学, 2014.
|
[36] |
张永健,惠卫军,项金钟,等. 晶粒尺寸对42CrMoVNb钢超高周疲劳性能的影响[J]. 金属学报, 2009, 45(7):880-886.
|
[36] |
张永健,惠卫军,项金钟,等. 晶粒尺寸对42CrMoVNb钢超高周疲劳性能的影响[J]. 金属学报, 2009, 45(7):880-886.
|
[37] |
韦东远, 顾家琳, 方鸿生,等. 1500MPa级贝氏体/马氏体复相高强钢的疲劳断裂特性[J]. 金属学报,2003,39(7):734-738.
|
[37] |
韦东远, 顾家琳, 方鸿生,等. 1500MPa级贝氏体/马氏体复相高强钢的疲劳断裂特性[J]. 金属学报,2003,39(7):734-738.
|
[38] |
翁宇庆. 提高高强度钢使用寿命的科技进展[J]. 中国材料进展, 2009, 28(9):51-61.
|
[38] |
翁宇庆. 提高高强度钢使用寿命的科技进展[J]. 中国材料进展, 2009, 28(9):51-61.
|
[1] |
WANG Zhi-ying, FU Rui, DU Jin-hui, [LU] Xu-dong, JI Chao, TONG Yue. Discussion about the affecting factors on sensitivity of ultrasonic C scan testing system[J]. PHYSICS EXAMINATION AND TESTING, 2020, 38(3): 33-. |
[2] |
YIN De-fu,WANG Kai-zhong,GONG Meng-qiang,ZHANG Xiao-rui. Properties of rotating bending fatigue of 55Cr3 spring steel for automotive stabilizer bars at room temperature[J]. PHYSICS EXAMINATION AND TESTING, 2019, 37(4): 17-20. |
[3] |
QIU Yu,CAI Ning,WANG Ze-yang,JU Xin-hua,JIANG Zhong-hang. Application of the Origin software on the analysis of high-cycle fatigue life[J]. , 2018, 36(6): 11-15. |
[4] |
YANG Wei,LI Wei-gang,,ZHAO Yun-tao,YAN Bao-kang,WANG Wen-bo. Mechanical property prediction of steel and influence factors selection based on random forests[J]. Iron and Steel, 2018, 53(3): 44-49. |
[5] |
WANG Wei,LIU Yang. Effect factors and suggestion of the accuracy of the sulfur-resistance test of tin plate[J]. , 2018, 36(2): 5-9. |
[6] |
GUO Li-bo,LI Peng,WU Qiang,GUAN Ming-yue,GAO Yan-qing. Applications of scanning electron microscope and energy spectrum analysis in steel metallurgy[J]. , 2018, 36(1): 30-36. |
|
|
|
|