|
|
A quantitative investigation on consolidation of titanium-containing pellets during roasting process |
Yao-zu Wang1, Jian-liang Zhang2, Zhi-hui Chen3, Zheng-jian Liu2, Chen-yang Xu2, Yu-meng Li2, Li-ming Ma2 |
1 Institute of Artificial Intelligence, University of Science and Technology Beijing, Beijing 100083, China
2 School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China
3 College of Artificial Intelligence, North China University of Science and Technology, Tangshan 063210, Hebei, China |
|
|
Abstract The measurement method and quantitative indexes of iron ore consolidation characteristic temperature (CCT) during roasting, including consolidation starting temperature, highest consolidation rate temperature, and consolidation termination temperature, were improved based on previous research. The mineral properties of V–Ti magnetite (Panzhihua) were analyzed, and the CCT of V–Ti magnetite was calculated. To investigate the effect of mineral types on CCT, a series of trials were carried out by using various ores, including high-grade magnetite ore, high silicon iron ore, and V–Ti magnetite ore. The greatest shrinkage of V–Ti magnetite was 6.7%, the consolidation starting temperature was 991 °C, and the termination temperature was 1384 °C. The results of X-ray diffraction analysis indicated that the V–Ti magnetite ore was composed of titanomagnetite, peridotite, and other minerals, which is more complicated than conventional magnetite. As a result, the temperature at the maximum rate of consolidation and the temperature at the termination of consolidation are the greatest. FeTiO3 and MgFe2O4 in V–Ti magnetite may inhibit the creation of sinter necks between hematite particles. Liquid phase occurs inside the pellet when the temperature surpasses 1250 °C, which may accelerate particle growth and the formation of a sintering neck within the pellets.
|
Received: 21 November 2021
Published: 25 January 2023
|
|
|
|
Cite this article: |
Yao-zu Wang,Jian-liang Zhang,Zhi-hui Chen, et al. A quantitative investigation on consolidation of titanium-containing pellets during roasting process[J]. Journal of Iron and Steel Research International, 2023, 30(1): 40-50.
|
|
|
|
[1] |
LI Qian, MA Yong-he, TANG Yin-hua, TANG Fang-jia, YANG Yong-bin. Research progress of organic binder for iron ore pellets[J]. Iron and Steel, 2022, 57(11): 11-21. |
[2] |
HOU Piao, YU Wen-zhou, BAI Chen-guang, PAN Cheng, YUAN Wan-neng, LI Tao. Viscous flow properties and influencing factors of vanadium-titanium magnetite smelting iron[J]. Iron and Steel, 2022, 57(1): 57-65. |
[3] |
ZHOU Shi-fa, ZHENG Hai-yan, DONG Yue, JIANG Xin, GAO Qiang-jian, SHEN Feng-man. Reduction dynamics of carbon-containing pellets of vanadium-bearing titanomagnetite[J]. Iron and Steel, 2021, 56(6): 15-20. |
[4] |
OU Yang1,2,SUN Yongsheng1,2,3,YU Jianwen1,2,3,LI Yanjun1,2. Research status and development prospect of utilization of vanadiumtitanium magnetite[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2021, 33(4): 267-278. |
[5] |
GAN Min, ZHU Liang, FAN Xiao-hui, JI Zhi-yun, SUN Zeng-qing, ZHENG Hao-xiang. Reaction behavior and influencing factors of catalytic denitration of iron ore pellets in chain grate[J]. Iron and Steel, 2021, 56(12): 36-42. |
[6] |
YANG Shuang-ping, YANG Xin, CAO Shuan-wei, WANG Miao, LI Jiang-han, WANG Yu-ping. Experiment on optimization of vanadium extraction from vanadium-titanium magnetite by response surface methodology[J]. Iron and Steel, 2021, 56(1): 21-27. |
|
|
|
|