汽车B柱开裂原因分析
张晓丹,李继康,吴赵波
钢铁研究总院,北京 100081
Crack analysis of automotive Bpillar
ZHAGN Xiaodan,LI Jikang,WU Zhaobo
Central Iron and Steel Research Institute, Beijing 100081, China
摘要 某热成型板汽车B柱在整车碰撞试验后发生开裂,对其进行断口分析、微观组织检验、力学性能研究,综合分析了其开裂原因。结果表明,该热成型板B柱由于焊接工艺问题,使用的CO2气体保护焊在焊缝不完全正火区,存在异常的贝氏体组织,且有带状组织存在,硬度远低于正常部位及技术要求,在碰撞后发生开裂。
关键词 :
汽车B柱 ,
热影响区 ,
不完全正火区 ,
带状组织
Abstract : An automotive Bpillar made of thermoformed steel plates was cracked after the vehicle crash test. Fracture failure analysis of automotive Bpillar was carried out by means of fracture analysis, microstructure examination and mechanical properties testing. The results show that the Bpillar cracked at the incompletely normalized zone of GMAW welding joint. The metallographic structure is bainite and banded structure, whose hardness is much lower than normal position and technical requirements.
Key words :
automotive Bpillar
heataffected zone
incompletely normalized zone; banded structure
收稿日期: 2021-10-11
[1]
王雁, 朱立光, 吴耀光, 王重君, 刘志远, 霍金霞. EH40级船体钢中焊接热影响区组织特征 [J]. 钢铁, 2022, 57(2): 139-148.
[2]
杨飞飞1,张忠铧2,刘华松1,罗明2,李根1,张家泉1. 高强度油井管用钢带状偏析及其条带型混晶现象研究 [J]. 钢铁研究学报, 2021, 33(9): 979-986.
[3]
杨跃标, 李宗强, 邓深, 樊雷, 刘清友, 赵征志. 热轧钛微合金化高强钢低温冲击韧性的控制 [J]. 钢铁, 2021, 56(3): 41-50.
[4]
谢毓敏, 宋明明, 门超奇, 朱航宇, 马国军, 薛正良. 钙处理对稀土在大线能量焊接HAZ中作用的影响 [J]. 钢铁, 2021, 56(3): 146-153.
[5]
杨杰, 姚海明, 吕浩, 马德刚, 李经哲. 汽车用双相钢铸坯成分偏析的研究 [J]. 连铸, 2021, 46(1): 1-8.
[6]
袁静, 时朋召, 帅勇, 廖桑桑, 徐李军, 仇圣桃. 16MnDR特厚钢板典型缺陷的形成原因分析 [J]. 连铸, 2020, 45(6): 68-73.
[7]
栾兆亮, 陈 华, 李天旭. 金相技术在钢产品生产中质量改进作用探讨 [J]. 物理测试, 2020, 38(6): 20-.
[8]
邢献强, 曹文全, 王存宇. 汽车悬架系统用55SiCr弹簧钢丝带状组织 [J]. 钢铁, 2020, 55(3): 68-73.
[9]
周任远, 朱丽慧, 李世贤, 翟国丽. T23钢再热裂纹敏感性的改善及其组织 [J]. 钢铁, 2020, 55(3): 80-86.
[10]
刘源1,王琳宁2. P91铁素体耐热钢细晶热影响区蠕变过程中组织演化 [J]. 钢铁研究学报, 2020, 32(3): 253-257.
[11]
张全新,朱 斌, 徐鸿昊, 曹征宽. 40CrNiMo钢轴开裂原因分析 [J]. 物理测试, 2020, 38(2): 32-.
[12]
夏 冰, 陈 斌,后宗保,赵志海. Q235B H型钢冷弯开裂原因分析 [J]. 物理测试, 2020, 38(2): 45-.
[13]
杨伟勇,陈永峰,陶群南,王东兴,张洪彪,汪春梅. 600MPa抗震钢筋条带状异常组织的分析与控制 [J]. 钢铁研究学报, 2020, 32(11): 1014-1020.
[14]
王丙兴,朱伏先,王超,娄号南,王昭东,王国栋. 氧化物冶金在大线能量焊接用钢中的应用 [J]. 钢铁, 2019, 54(9): 12-21.
[15]
王毓男,蒋晓放. 大线能量焊接用海工钢的夹杂物与组织 [J]. 钢铁, 2019, 54(8): 209-215.