Abstract��The rheological curves of martensite ��M�� in 45 steel were measured on a Gleeble-3500 thermal simulator in a warm compression test. The results showed that the flow stress of martensite decreased with the increase of deformation temperature�� and the grain of ferrite ��F�� changed to equiaxed grain. In addition�� the mechanism leading to the above rheological behavior of M tissue was discussed.
in Xinbo, Xiao Hongsheng, Zhang Zhiliang. Flow Stress of Carbon Steel 08F in Temperature Range of Warm-Forging. Journal of Materials Processing Technology, 2003, 139: 543�C5462Siamak Serajzadeh. Modelling the Warm Rolling of a Low Carbon Steel[J]. Materials Science and Engineering A, 2004, 371: 318�C3233R Song��D Ponge��D Raabe��R Kaspar. Microstructure and Crystallographic Texture of an Ultrafine Grained C-Mn Steel and their Evolution during Warm Deformation and Annealing[J]. Acta Materialia��2005��53��845�C8584Zhao Xin��Jing Tianfu��GaoYuwei��Qiao Guiying��Zhou Jifeng��Wang Wei. Annealing Behavior of Nano-Layered Steel Produced by Heavy Cold-Rolling of Lath Martensite[J]. Materials Science and Engineering A, 2005, 397: 117-121