(1. National Engineering Research Center for Equipment and Technology of Cold Strip Rolling, Yanshan University,Qinhuangdao 066004,Hebei,China 2. Qinhuangdao Shouqin Metal Materials Co., Ltd., Qinhuangdao 066000,Hebei,China)
Abstract:A lot of complex factors were analyzed in the iron making productive on-site in order to deal with the fluctuation of burden distribution laps of bell-less top in blast furnace. The key reason of fluctuation that the feedback angle of selsyn could not correspond to the rotating angle of throttle valve accurately was confirmed in the current study. The mathematic model was built based on the control mode by means of the feedback angle of selsyn. The rotating angle of throttle valve was controlled by the feedback of selsyn instead of the linear displacement of hydro-cylinder. Magnetostrictive displacement transducer was assembled in the hydro-cylinder so as to keep the signal away from outside interference. The linearity error was less than 150 μm when the displacement range of Magnetostrictive displacement transducer was 300 mm. The stability of the burden distribution was improved significantly and the error range of laps between burden distribution and foreman requirement is less than ±0.5 after using the new controlled mode.
郭 龙,张兴中,岳利涛,冯常喜. 对高炉无料钟炉顶精确布料的改进[J]. 钢铁, 2017, 52(3): 15-20.
GUO Long,ZHANG Xing-zhong,YUE Li-tao,FENG Chang-xi. Improvement on burden distribution of bell-less top in blast furnace. Iron and Steel, 2017, 52(3): 15-20.
周传典. 高炉炼铁生产技术手册[M]. 北京:冶金工业出版社,2011:1-3. ZHOU Chuan-dian. Production technical manual of BF[M]. Beijing: Metallurgical Industry Press,2011:1-3.
[1]
周传典. 高炉炼铁生产技术手册[M]. 北京:冶金工业出版社,2011:1-3. ZHOU Chuan-dian. Production technical manual of BF[M]. Beijing: Metallurgical Industry Press,2011:1-3.
[2]
郑志斌,宋恩奎. 2000m3高炉新并罐炉顶技术[J]. 冶金设备,2015,(217):72-74.ZHENG zhi-bin,SONG en-kui. New Technology of Two Bucket Combine for 2000 m3 Blast Furnace Top[J]. Metallurgical Equipment,2015,(217):72-74.
[2]
郑志斌,宋恩奎. 2000m3高炉新并罐炉顶技术[J]. 冶金设备,2015,(217):72-74.ZHENG zhi-bin,SONG en-kui. New Technology of Two Bucket Combine for 2000 m3 Blast Furnace Top[J]. Metallurgical Equipment,2015,(217):72-74.
[3]
刘云彩. 高炉布料规律[M]. 北京:冶金工业出版社,2005:1-30.LIU Yun-cai. Regular Pattern About Burden Distribution of BF[M]. Beijing:Metallurgical Industry Press,2005:1-30.
[3]
刘云彩. 高炉布料规律[M]. 北京:冶金工业出版社,2005:1-30.LIU Yun-cai. Regular Pattern About Burden Distribution of BF[M]. Beijing:Metallurgical Industry Press,2005:1-30.
[4]
ZHAO Hua-tao,ZHU Ming-hua,DU Ping,et al. Uneven Distribution of Burden Materials at Blast Furnace Top in Bell-less Top with Parallel Bunkers[J]. Isij International,2012,52(12):2177-2185.
[4]
ZHAO Hua-tao,ZHU Ming-hua,DU Ping,et al. Uneven Distribution of Burden Materials at Blast Furnace Top in Bell-less Top with Parallel Bunkers[J]. Isij International,2012,52(12):2177-2185.
[5]
李传辉,安铭,高征铠,等. 高炉无料钟炉顶布料规律探索与实践[J]. 钢铁,2006,41(5):6-10.LI Chuan-hui,AN Ming,GAO Zhengkai,et al. Research and Practice of Burden Distribution in BF[J]. Iron and Steel,2006,41(5):6-10.
[5]
李传辉,安铭,高征铠,等. 高炉无料钟炉顶布料规律探索与实践[J]. 钢铁,2006,41(5):6-10.LI Chuan-hui,AN Ming,GAO Zhengkai,et al. Research and Practice of Burden Distribution in BF[J]. Iron and Steel,2006,41(5):6-10.
[6]
邱家用,高征铠,张建良,等. 无料钟炉顶高炉中炉料流动轨迹的模拟[J]. 过程工程学报,2011,11(3):368-375. QIU Jia-yong,GAO Zheng-kai,ZHANG Jian-liang,et al. Simulation of Burden Trajectory in a Bell-less Top Blast Furnace[J]. The Chinese Journal of Process Engineering,2011,11(3):368-375.
[6]
邱家用,高征铠,张建良,等. 无料钟炉顶高炉中炉料流动轨迹的模拟[J]. 过程工程学报,2011,11(3):368-375. QIU Jia-yong,GAO Zheng-kai,ZHANG Jian-liang,et al. Simulation of Burden Trajectory in a Bell-less Top Blast Furnace[J]. The Chinese Journal of Process Engineering,2011,11(3):368-375.
[7]
于冬,周砚,林申铭. 一种高炉布料器模型的电液控制方法研究[J]. 宝钢技术,2015 (5):53-56.YU Dong,ZHOU Yan,LIN Shen-ming. Electro-hydraulic Control Method Study on Distributor Model for Blast Furnace[J]. Baosteel Technology,2015 (5):53-56.
[7]
于冬,周砚,林申铭. 一种高炉布料器模型的电液控制方法研究[J]. 宝钢技术,2015 (5):53-56.YU Dong,ZHOU Yan,LIN Shen-ming. Electro-hydraulic Control Method Study on Distributor Model for Blast Furnace[J]. Baosteel Technology,2015 (5):53-56.
[8]
管孝群.马钢2500 m3高炉无料炉顶节流阀特性的研究[J].炼铁,1995,14(3):37.GUAN Xiao-qun. Characteristics of Iris Flow Control Valve of Bell-Less Top for the New No.1BF at Maanshan Iron and Steel Co[J]. Ironmaking,1995,14(3):37.
[8]
管孝群.马钢2500 m3高炉无料炉顶节流阀特性的研究[J].炼铁,1995,14(3):37.GUAN Xiao-qun. Characteristics of Iris Flow Control Valve of Bell-Less Top for the New No.1BF at Maanshan Iron and Steel Co[J]. Ironmaking,1995,14(3):37.
[9]
王平.串罐无料钟料流轨迹与宽度测定及其分析[J].钢铁,2003,38(3):8.WANG Ping. Measurement and Analysis of Burden Flow Trajectory and Width Bell-Less Top With Two Concentric Vertical Hoppers[ J].Iron and Steel,2003,38(3):8.
[9]
王平.串罐无料钟料流轨迹与宽度测定及其分析[J].钢铁,2003,38(3):8.WANG Ping. Measurement and Analysis of Burden Flow Trajectory and Width Bell-Less Top With Two Concentric Vertical Hoppers[ J].Iron and Steel,2003,38(3):8.
[10]
于成忠,金昕.无钟高炉布料器布料规律研究[J].冶金设备,2007,(4):15-18YU Cheng-zhong,JIN Xin. Development on Distribution Regular of Charge Distributor of Bell-Less Top BF[J]. Metallurgical Equipment,2007,(4):15-18.
[10]
于成忠,金昕.无钟高炉布料器布料规律研究[J].冶金设备,2007,(4):15-18YU Cheng-zhong,JIN Xin. Development on Distribution Regular of Charge Distributor of Bell-Less Top BF[J]. Metallurgical Equipment,2007,(4):15-18.
[11]
Kaijmasa Y,Jimbo T,Komatani A,et al. Application of Simulation Model for Burden Distribution to Actual Operation[J]. Trans ISIJ,1984,24(5):379
[11]
Kaijmasa Y,Jimbo T,Komatani A,et al. Application of Simulation Model for Burden Distribution to Actual Operation[J]. Trans ISIJ,1984,24(5):379
[12]
毕学工.高炉过程数学模拟及计算机控制[M].北京:冶金工业出版社,1996. BI Xue-gong. Mathematical Simulation and Computer Control About BF Process[ M].Beijing:Metallurgical Industry Press,1996.
[12]
毕学工.高炉过程数学模拟及计算机控制[M].北京:冶金工业出版社,1996. BI Xue-gong. Mathematical Simulation and Computer Control About BF Process[ M].Beijing:Metallurgical Industry Press,1996.