1. School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China;2. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China;3. Handan Iron and Steel Corp., Handan 065015, Hebei, China; 4. Chengde Jianlong Iron and Steel Corp., Chengde 067000, Hebei, China
Abstract：The analysis of CSP mold with EMBr at HANDAN iron and steel corp.showed that 40% reduction of total oxygen and 61% reduction of macroinclusions can be realized and the quality of thin slabs can be improved effectively by EMBr. The experiments indicated that the range of level fluctuation of molten steel surface in the mold without EMBr is ±7mm and ±4 mm with EMBr.The threedimensional mathematical flow field and electromagnetic field models were developed to analyze the flow field in CSP mold by CFX software. Theoretical calculation showed that the maximum surface velocity at the center of meniscus with EMBr is 4 times lower than that without EMBr. The maximum turbulant kinetic energy at the center of meniscus with EMBr is also 3 times less than that without EMBr. The quality of thin slabs can be improved effectively by EMBr.
魏军;孙彦辉;蔡开科;周英超;魏祖康. CSP结晶器EMBr的冶金效果和流场理论分析[J]. 钢铁, 2007, 42(8): 32-0.
WEI Jun;SUN Yanhui;CAI Kaike;ZHOU Yingchao;WEI Zukang. Theoretical Analysis on Metallurgical Effect and Flow Field of CSP Mold With EMBr. Iron and Steel, 2007, 42(8): 32-0.
2007, Vol. 42 
