Effects of Niobium Content and Heat Treatment Technology on Microstructure and Mechanical Properties of TRIP Steels
TANG Zhengyou1,DING Hua1,2,LI Long1,LI Wei1
1. School of Materials and Metallurgy, Northeastern University, Shenyang 110004, Liaoning, China; 2.The State Key Lab. of Rolling and Automation of Northeastern University, Shenyang 110004, Liaoning, China
Abstract： Effect of isothermal treatment temperature in bainite region and Nb content on microstructure and mechanical properties of lowcarbon (w(Mn)=1.38%, w(Si)=0.6%, w(Al)=0.5%) TRIP(Transformation Induced Plasticity) steels was investigated by annealing in twophase region and isothermal treatment in bainite region. The results show that the increase in Nb content, decreases retained austenite fraction, however, increases tensile strength and yield strength. When Nb content is 0.014%, the experimental steel has a high elongation and good strengthductility balance (TS×EL). The experimental steel has high retained austenite fraction, and good mechanical properties when the isothermal treatment in bainite region is 400 ℃.
唐正友;丁桦;李龙;李卫. 铌含量和热处理工艺对TRIP钢组织和力学性能的影响[J]. 钢铁, 2006, 41(11): 58-0.
TANG Zhengyou;DING Hua;LI Long;LI Wei. Effects of Niobium Content and Heat Treatment Technology on Microstructure and Mechanical Properties of TRIP Steels. Iron and Steel, 2006, 41(11): 58-0.
2006, Vol. 41 
