Second Phase Analysis of VN Microalloy Steel Produced by EAFCSP
LIU Qingyou1,YANG Xiaojun1,2,MAO Xinping3,LIN Zhenyuan3,ZHANG Liwen2
1. Institute for Structural Materials, Central Iron and Steel Research Institute, Beijing 100081, China;2. Department of Material Science and Engineering,Dalian University of Technology, Dalian 116024, Liaoning, China;3. Institute of CSP Technology,Zhujiang Iron and Steel Co.,Ltd., Guangzhou 510730, Guangdong, China
Abstract:The VN microalloy steel with yield strength of 550 MPa is produced by EAFCSP route. However, based on the thermodynamics, there are different opinious regarding the analysis of V(C,N) particles in the waterquenched continuously cast slab.The physicochemical phase analysis,SEM and TEM analysis were used to observe the precipitates during EAFCSP process.The effect of Ti and Al on the precipitation of V(C,N) is discussed by use of ThermoCalc software.
刘清友;杨小军;毛新平;林振源;张立文. EAFCSP流程VN微合金钢中第二相的析出[J]. 钢铁, 2007, 42(4): 53-0.
LIU Qingyou;YANG Xiaojun;MAO Xinping;LIN Zhenyuan;ZHANG Liwen. Second Phase Analysis of VN Microalloy Steel Produced by EAFCSP. Iron and Steel, 2007, 42(4): 53-0.