Experimental Research of Hot Metal Predephosphorizing With Premelted Dephosphorizer
WEI Yingjuan1，YUAN Shouqian1，ZHANG Xifeng1， WANG Wei1，LIANG Dean2，ZHANG Qiye2
1.The School of Metallurgical Engineering, Xi’an University of Architecture and Technology, Xi’an 710055, Shaanxi, China；2. Jiaozuo Zhende Refractory Co., Ltd., Jiaozuo 454001，Henan, China
Abstract：With CaOFe2O3CaF2 system slag as dephosphorizer,the influencing factors of such premelted dephosphorizer,composition,addition rate, treating temperature, initial phosphors content in hot metal and granularity of premelted slag was studied in laboratory. As a result, at 1350 ℃ and with a ratio of w(CaO)/w(Fe2O3) about 1.0,adding 10％ premelted dephosphorizer could lower the phosphorus content in hot metal to 0.0079％ with a dephosphorization rate of 96.24％. The dephosphorization rate was not affected by initial phosphorus content in hot metal and granularity of premelted slag.
魏颖娟;袁守谦;张西锋;王伟;梁德安;张启业. 预熔脱磷剂进行铁水脱磷的实验研究[J]. 钢铁, 2008, 43(10): 42-0.
WEI Yingjuan;YUAN Shouqian;ZHANG Xifeng;WANG Wei;LIANG Dean;ZHANG Qiye. Experimental Research of Hot Metal Predephosphorizing With Premelted Dephosphorizer. Iron and Steel, 2008, 43(10): 42-0.
2008, Vol. 43 
