Effect of Pig Iron Charge on Converter Steelmaking
YANG Wenyuan1,ZOU Jiezhong2,WANG Minglin1,XIAO Shixin2
1. Metallurgical Department, Central Iron and Steel Research Institute, Beijing 100081, China; 2. Technical Center, Pingxiang Iron and Steel Group Co., Pingxiang 337000, Jiangxi, China
Abstract:Excessive pig iron is usually charged in converter in order to increase steel output at middle and small steel plants.But some problems are occurred,such as low bath temperature, difficulty in lime melting,slag overflow at vessel mouth, increase of metal consumption, difficulty in dephosphorization and low hitting rate at the final. In order to keep the normal bath temperature and slag forming condition, the charge of pig iron should not be exceeded 10% on middle and small converter.
杨文远;邹节忠;王明林;肖时新. 生铁块加入量对转炉吹炼过程的影响[J]. 钢铁, 2007, 42(6): 26-0.
YANG Wenyuan;ZOU Jiezhong;WANG Minglin;XIAO Shixin. Effect of Pig Iron Charge on Converter Steelmaking. Iron and Steel, 2007, 42(6): 26-0.