Kinetics of strain induced precipitation of TiC by hot compression method
WANG Zhi-yong1，SONG Xin1，WANG Zhen-qiang2，LIU Chun-ming2，SUN Xin-jun3
（1. Department of Rolling Steel，Qinhuangdao Shouqin Metal Materials Co.，Ltd.，Qinhuangdao 066000，Hebei，China 2. Plate Technology Department， Shougang Research Institute of Technology，Beijing 100043， China 3. Department of Engineering Steels， Central Iron and Steel Research Institute，Beijing 100081，China）
Abstract：The kinetics of strain induced precipitation in a 0.047%C-0.109%Ti micro-alloyed steel was studied by a stress relaxation (SR)method， a two-stage interrupted compression (TS) method and transmission electron microscopy (TEM)in Gleeble 1500D thermal testing. Three groups of precipitation-time-temperature (PTT) diagrams were obtained by analyzing stress relaxation curves， softening kinetic curves and the amounts and sizes of strain induced precipitates at various isothermal holding times. The results showed that the PTT diagrams by three methods all exhibited typical “C” shape， and the nose temperatures of them located at approximately 900 ℃. The two-stage interrupted method shows the highest reliability and sensitivity in terms of the determination of the onset time of precipitation[（Ps）]. TEM results showed that the strain induced precipitates identified with fcc structure (B1 NaCl structure) were pure TiC particles， and were distributed in a chain-like and a cell-like manner on carbon replica. In addition， the precipitates followed a parabolic law (1/2 law) during the growth stage， and obeyed a 1/10 law during the coarsening stage.
王志勇，宋 欣，王振强，刘春明，孙新军. 热压缩法研究TiC形变诱导析出动力学[J]. 钢铁, 2015, 50(10): 90-95.
WANG Zhi-yong，SONG Xin，WANG Zhen-qiang，LIU Chun-ming，SUN Xin-jun. Kinetics of strain induced precipitation of TiC by hot compression method. Iron and Steel, 2015, 50(10): 90-95.
X P Mao, X D, Huo, X J Sun, Y. Z. Chai.[J].JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2010, 210 (12):1660-1666
[2]
X P Mao, X D, Huo, X J Sun, Y. Z. Chai.[J].JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2010, 210 (12):1660-1666
[3]
Z Q Wang, X P Mao, Z G Yang, X J Sun, Q L Yong, Z D Li, Y Q Weng.Strain-induced precipitation in a Ti micro-alloyed HSLA steel [J].MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 529 :459-467
[3]
Z Q Wang, X P Mao, Z G Yang, X J Sun, Q L Yong, Z D Li, Y Q Weng.Strain-induced precipitation in a Ti micro-alloyed HSLA steel [J].MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 529 :459-467
[4]
Z Q. Wang, Q. L. Yong, X. J. Sun, Z. G. Yang, C. Zhang, Z. D. Li, Y. Q. Weng..[J]., 2012,, 52(9):1661-1669
[4]
Z Q. Wang, Q. L. Yong, X. J. Sun, Z. G. Yang, C. Zhang, Z. D. Li, Y. Q. Weng..[J]., 2012,, 52(9):1661-1669
[5]
L.Xu, J. Shi, W. Q. Cao, M. Q. Wang, W. J. Hui, H. Dong. J. Mater. Sci., 2011, 46: 6384-6389.
[5]
L.Xu, J. Shi, W. Q. Cao, M. Q. Wang, W. J. Hui, H. Dong. J. Mater. Sci., 2011, 46: 6384-6389.
[6]
L.Xu, J. Shi, W. Q. Cao, M. Q. Wang, W. J. Hui, H. Dong. J. Mater. Sci., 2011, 46: 3653-3658.
[6]
L.Xu, J. Shi, W. Q. Cao, M. Q. Wang, W. J. Hui, H. Dong. J. Mater. Sci., 2011, 46: 3653-3658.
[7]
Y.Han, J. Shi, L. Xu, W. Q. Wen, H Dong. Mater. Sci. Eng. A, 2011, 530: 643-651.
[7]
Y.Han, J. Shi, L. Xu, W. Q. Wen, H Dong. Mater. Sci. Eng. A, 2011, 530: 643-651.
[8]
Y.Han, J. Shi, L. Xu, W. Q. Cao and H. Dong. Mater. Design, 2012, 34: 427-434.
[8]
Y.Han, J. Shi, L. Xu, W. Q. Cao and H. Dong. Mater. Design, 2012, 34: 427-434.
[9]
M.G. Akben, T. Chandra, P. Plassiard, J. J. Jonas. Acta Metall. 1984, 32: 591-601.
[9]
M.G. Akben, T. Chandra, P. Plassiard, J. J. Jonas. Acta Metall. 1984, 32: 591-601.
[10]
W.J. Liu, J. J. Jonas. Metall. Trans. 19A, 1988: 1403-1410.
[10]
W.J. Liu, J. J. Jonas. Metall. Trans. 19A, 1988: 1403-1410.
[11]
A.I. Fernandez, B. Lopez, J. M. RodriguezIbabe, Scripta Mater., 1999, 40: 543-549.
[11]
A.I. Fernandez, B. Lopez, J. M. RodriguezIbabe, Scripta Mater., 1999, 40: 543-549.
[12]
J.S. Park, Y. S. Ha, and Y. K. Lee. Metallurgical and Materials Transactions A, 2009, 40:1515.
[12]
J.S. Park, Y. S. Ha, and Y. K. Lee. Metallurgical and Materials Transactions A, 2009, 40:1515.
[13]
W.J. Liu and J. J. Jonas. Metallurgical Transactions A, 1988, 19: 1415.
[13]
W.J. Liu and J. J. Jonas. Metallurgical Transactions A, 1988, 19: 1415.
[14]
W.J. Liu, S. Yue, J. J. Jonas. Metallurgical Transactions A, 1989, 20: 1907.
[14]
W.J. Liu, S. Yue, J. J. Jonas. Metallurgical Transactions A, 1989, 20: 1907.
[15]
W.J. Liu, J. J. JONAS. Metallurgical Transactions A, 1989, 20: 1361.
[15]
W.J. Liu, J. J. JONAS. Metallurgical Transactions A, 1989, 20: 1361.
[16]
雍岐龙.钢铁材料中的第二相, 冶金工业出版社, 北京 2006.
[16]
雍岐龙.钢铁材料中的第二相, 冶金工业出版社, 北京 2006.
[17]
B.Dutta, E. J. Palmiere, C. M. Sellars, Acta Mater., 2001, 49: 785–794.
[17]
B.Dutta, E. J. Palmiere, C. M. Sellars, Acta Mater., 2001, 49: 785–794.
2015, Vol. 50 
