Development and engineering manufacture technology of 9%-12% Cr high and medium pressure rotor material
LI Qi1,2,3, CHEN Zheng-zong2, JIANG Xin-liang3, LIU Zheng-dong2, ZUO Liang1
1. Key Laboratory for Anisotropy and Texture of Materials, Ministry of Education, Northeastern University, Shenyang 110819, Liaoning, China; 2. Institute for Special Steels, China Iron and Steel Research Institute, Beijing 100081, China; 3. National Engineering Laboratory for Numerical Simulation of Heavy Castings and Forgings, Erzhong (Deyang) Heavy Equipment Co., Ltd., Deyang 618000, Sichuan, China
Abstract:Due to the particularity of dimensions and working condition,the high and medium pressure rotor forgings have been the major critical component with milestone significance in the process of technological development of ultra-supercritical units. Nowadays,9%-12%Cr martensitic heat-resistant steel is widely used to produce the high and medium pressure rotor forgings for 600-620 ℃ ultra-supercritical units. The developing history of 9%-12%Cr heat-resisting material for the high and medium pressure rotor forgings in recent 60 years was comprehensively discussed. For high and medium pressure rotor forgings with different service temperatures,the material selection, chemical composition and strengthening mechanism of forgings are emphatically introduced,and the difficulties and key points of smelting process,forging process and heat treatment process in engineering manufacturing process are briefly described,which provides guidance for the engineering manufacturing of high and medium pressure rotor forgings of ultra-supercritical units at 600 ℃ and above.
李其, 陈正宗, 蒋新亮, 刘正东, 左良. 9%~12%Cr高中压转子材料发展历程与工程化关键技术[J]. 钢铁, 2021, 56(2): 40-49.
LI Qi, CHEN Zheng-zong, JIANG Xin-liang, LIU Zheng-dong, ZUO Liang. Development and engineering manufacture technology of 9%-12% Cr high and medium pressure rotor material[J]. Iron and Steel, 2021, 56(2): 40-49.
[1] Tanuma T. Advances in Steam Turbines for Modern Power Plants[M]. Sawston:Woodhead Publishing,2017. [2] 周荣灿,范长信. 超超临界火电机组材料研究及选材分析[J]. 中国电力,2005,38(8):41. (ZHOU Rong-can,FAN Chang-xin. Review of material research and material selection for ultra-supercritical power plants[J]. Electric Power,2005,38(8):41.) [3] Viswanathan R,Bakker W. Materials for ultrasupercritical coal power plants—Turbine materials:Part II[J]. Journal of Materials Engineering and Performance,2001,10(1):96. [4] 田仲良,包汉生,何西扣,等. 700 ℃汽轮机转子用耐热合金的研究进展[J]. 钢铁,2015,50(2):54. (TIAN Zhong-liang,BAO Han-sheng,HE Xi-kou,et al. Research development on the heat resistant alloy used for 700 ℃ USC turbine rotor[J]. Iron and Steel,2015,50(2):54.) [5] 石如星,刘正东,张才明. P92耐热钢δ-铁素体含量的热力学计算与试验分析[J]. 钢铁,2011,46(11):89. (SHI Ru-xing,LIU Zheng-dong,ZHANG Cai-ming. Thermodynamic calculation and experimental measurement of δ-ferrite amount in P92 heat-resistant steel[J]. Iron and Steel,2011,46(11):89.) [6] Starr F. High Temperature Materials Issues in the Design and Operation of Coal-Fired Steam Turbines and Plant[M]. The United Kingdom of Great Britain and Northern Ireland:Structural Alloys for Power Plants,2014. [7] Wrighta I G,Maziasza P J,Ellisb F V,et al. Materials issues for turbines for operations in ultra-supercritical steam[C]//Proceedings of the 29th Internal Conference on Coal Utilization and Fuel System. Florida:US Department of Energy,2004:23. [8] Masuyama F. History of power plants and progress in heat resistant steels[J]. ISIJ International,2001,41(6):612. [9] LecomteBeckers J,Schubert F,Ennis P J. Materials for Advanced Power Engineering 1998[M]. Germany:Forschungszentrum Juelich GmbH,1998. [10] 李益民,范长信,杨百勋,等. 大型火电机组用新型耐热钢[M]. 北京:中国电力出版社,2013. (LI Yi-min,FAN Chang-xin,YANG Bai-xun,et al. New Heat-Resistant Steel for Large Coal-Fired Units[M]. Beijing:China Electric Power Press,2013.) [11] 巩秀芳,杨功显,范华,等. 600 ℃以上超超临界汽轮机组用材[J]. 东方电气评论,2011,25(1):7. (GONG Xiu-fang,YANG Gong-xian,FAN Hua,et al. Materials for ultra-supercritical steam turbines operating at the steam temperature above 600 ℃[J]. Dongfang Electric Review,2011,25(1):7.) [12] 刘正东,陈正宗,何西扣,等. 630~700 ℃超超临界燃煤电站耐热管及其制造技术进展[J]. 金属学报,2020,56(4):539.(LIU Zheng-dong,CHEN Zheng-zong,HE Xi-kou,et al. Systematical innovation of heat resistant materials used for 630-700 ℃ advanced ultra-supercritical (A-USC) fossil fired boilers[J]. Acta Metallurgica Sinica,2020,56(4):539.) [13] Trumpler W E,Lebreton A F,Fox E A,et al. Development associated with the superpressure turbine for eddystone station unit No.1[J]. Journal of Engineering for Power,1960,82(4):286. [14] Fujita T,Sato T,Takahashi N. Effect of Mo and W on long term creep rupture strength of 12% Cr heat-resisting steel containing V,Nb and B[J]. Transactions of the Iron and Steel Institute of Japan,1978,18:115. [15] 胡初民. 电站汽轮机12%CrMoVTaN转子用钢[J]. 大型铸锻件,1983(2):46. (HU Chu-min. Power steam turbine 12%CrMoVTaN rotor steel[J]. Heavy Castings And Forgings,1983(2):46.) [16] Walsh M A. Manufacture of 10%CrMoVNbN turbine rotor for supercritical applications[C]//The 13th International Forgemasters Meeting. Pusan:Iron and Steel Institute,1997:399. [17] Taira J,Orita K,Azuma T,et al. Development and production of high purity 12%Cr steel for gas turbine disc material[C]//The 12th International Forgemasters Meeting. Chicago Illinois:Iron and Steel Institute,1994:175. [18] Gianfrancesco A D. Materials for Ultra Supercritical and Advanced Ultra Supercritical Power Plants[M]. Sawston:Woodhead Publishing,2017. [19] Torsten-Ulf K,Horst C,Karl H M,et al. Development and qualification of rotor steels for 600 to 650 ℃ application in COST501/C0ST522[C]//The 14th International Forgemasters Meeting. Wiesbaden:German Iron and Steel Institute,2000:270. [20] Hizume A,Takeda Y,Yokota H,et al. An advanced 12Cr steel rotor applicable to elevated steam temperature 593 ℃[J]. Journal of Engineering Materials and Technology,1987,109(4):319. [21] Fujita T. Current progress in advanced high Cr ferritic steels for high-temperature applications[J]. ISIJ International,1992,32(2):175. [22] Kern T U,Staubli M,Zeiler G,et al. The european material development within COST522 for 650 ℃ USC power plants[C]//The 15th International Forgemasters Meeting. Kobe City:Steel Castings and Forgings Assn of Japan,2003:244. [23] Kern T U,Staubli M. The european effort in development of new high temperature rotor materials-cost 536[C]//The 8th Liege Cost Conference on Materials for Advanced Power Engineering. Liege:Forschungszentrum Jülich GmbH,2006:19. [24] Hald J. Development status and future possibilities for martensitic creep resistant steels[C]//The 9th Liege Cost Conference on Materials for Advanced Power Engineering. Liege:Forschungszentrum Jülich GmbH,2010:55. [25] Stefan P,Guenter Z,Albert P,et al. Development of high creep resistant MARBN steels for forged components in high efficient fossil-fired power plants[C]//The 19th International Forgemasters Meeting. Kobe City:Steel Castings and Forgings Assn of Japan,2014:338. [26] Yasunori K,Fumihiko T,Osamu I,et al. Development and manufacturing of the next generation of advanced 12%Cr steel rotor for 630° C steam temperature[C]//The 14th International Forgemasters Meeting. Wiesbaden:German Iron and Steel Institute,2000:301. [27] Keita K,Takayuki M,Takashi S,et al. Manufacturing of advanced 12% Cr steel forgings for steam turbines[C]//The 18th International Forgemasters Meeting. Pittsburgh:Forging Industry Association,2011:244. [28] Tsuda Y,Yamada M,Ishii R,et al. Development of high strength 12% Cr ferritic steel for turbine rotor operating above 600 ℃[J]. ASTM Special Technical Publication,1997,54(1):48. [29] 梅林波,沈红卫,王思玉,等. 625 ℃汽轮机转子材料的开发及性能分析[J]. 热力透平,2012,41(3):183. (MEI Lin-bo,SHEN Hong-wei,WANG Si-yu,et al. Development and property analysis of rotor material for 625 ℃ steam turbines[J]. Thermal Turbine,2012,41(3):183.) [30] Arai M,Doi H,Azuma T,et al. Development of high WCoB-containing 12Cr rotor steels for use at 650° C in USC power plants[C]//The 15th International Forgemasters Meeting. Kobe City:Steel Castings and Forgings Assn of Japan,2003:261. [31] Murata M Y,Kohji Y,Masahiko M,et al. Precipitation and growth behaviour of M23C6 carbide and z-phase in high chromium heat resistant ferritic steels[C]//The 17th International Forgemasters Meeting. Santander:Iron and Steel Institute,2008:340. [32] Donth B,Blaes N,Atmadja S H,et al. New material and manufacturing developments for USC steam turbine rotor forgings[C]//The 14th International Forgemasters Meeting. Wiesbaden:German Iron and Steel Institute,2000:192. [33] Masato M,Koji M,Yoshihiro O,et al. Manufacturing of 12%Cr rotor forgings for high temperature steam turbines from electro slag hot topped ingot[C]//The 14th International Forgemasters Meeting. Wiesbaden:German Iron and Steel Institute,2000:295. [34] Kern T U,Scarlin B,Donth B,et al. The european Cost536 project for the development of new high temperature rotor materials[C]//The 17th International Forgemasters Meeting. Santander:Iron and Steel Institute,2008:335. [35] 包汉生,傅万堂,程世长,等. T122耐热钢中氮化硼(BN)化合物的探讨[J]. 钢铁,2005,40(10):71. (BAO Han-sheng,FU Wan-tang, CHENG Shi-chang,et al. An Investigation on boron-nitride(BN) compound in T122 heat resistant steel[J]. Iron and Steel,2005,40(10):71.)