Effects of Si and Cr on microstructure and mechanical properties of ultra high strength dual-phase steel
YE Jie-yun1, ZHAO Zheng-zhi2, ZHANG Ying-hui1, QI Liang1
1. School of Material Science and Engineering, Jiangxi University of Science and Technology, Ganzhou 341000, Jiangxi, China 2. Engineering Research Institute, University of Science and Technology of Beijing,Beijing 100083, China
Abstract:The effects of Cr and Si on the transformation of C-Cr-Mn-Nb and C-Si-Mn-Nb ultra-high strength dual phase steels were analyzed by using thermal dilatometer. The microstructure properties and the fracture surfaces of the steels were tested by tensile tests, optical microscopy, scanning electron microscopy and transmission electron microscope. The results show that the addition of Si can increase the temperature of [Ac1]and[Ac3], enlarge the two phase region, promote the ferrite transformation, increase the aging stability of martensite and improve its morphology and distribution; the addition of Cr leads to the uneven distribution of C in austenite, the appearance of lamellar and parallel twin microstructure, as well as the appearance of residual austenite and the M/A in the fast cooling stage and the decomposition of some martensite in overaging stage. Although tensile strength and elongation of the two steels both exceed 1 000 MPa and 15% respectively, the comprehensive mechanical properties of DP steel containing Si are superior to that containing Cr.
叶洁云, 赵征志, 张迎晖, 齐 亮. 硅和铬对超高强双相钢组织和性能的影响[J]. 钢铁, 2015, 50(3): 78-83.
YE Jie-yun, ZHAO Zheng-zhi, ZHANG Ying-hui, QI Liang. Effects of Si and Cr on microstructure and mechanical properties of ultra high strength dual-phase steel. Iron and Steel, 2015, 50(3): 78-83.
A Nouri, H Saghafian, Sh Kheirandish. Effects of Silicon Content and Intercritical Annealing on Manganese Partitioning in Dual Phase Steels[J]. Journal of Iron and Steel research, 2010, 5(17): 44-50
[6]
A Nouri, H Saghafian, Sh Kheirandish. Effects of Silicon Content and Intercritical Annealing on Manganese Partitioning in Dual Phase Steels[J]. Journal of Iron and Steel research, 2010, 5(17): 44-50
[7]
lchiro Tsukatani, Shunichi Hashimoto, Tsuyoshi Inoue. Effects of Silicon and Manganese Addition on Mechanical Properties of High-strength Hot-rolled Sheet Steel Containing Retained-Austenite[J]. ISIJ International, 1991, 31(9): 992-1000
[7]
lchiro Tsukatani, Shunichi Hashimoto, Tsuyoshi Inoue. Effects of Silicon and Manganese Addition on Mechanical Properties of High-strength Hot-rolled Sheet Steel Containing Retained-Austenite[J]. ISIJ International, 1991, 31(9): 992-1000
[8]
Son, YILee, YKPark, et al.Ultrafine grained ferrite-marten site dual phase steels fabricated via equal channel angular pressing: Microstructure and tensile properties[J]. Acta Materialia, 2005, 53(11):3125-3134
[8]
Son, YILee, YKPark, et al.Ultrafine grained ferrite-marten site dual phase steels fabricated via equal channel angular pressing: Microstructure and tensile properties[J]. Acta Materialia, 2005, 53(11):3125-3134
Nouri A,Saghafian H, Kheirandish. Effects of Silicon Content and Intercritical Annealing on Manganese Partitioning in Dual Phase Steels[J]. Journal of Iron and Steel research, 2010, 5(17):44-50
[11]
Nouri A,Saghafian H, Kheirandish. Effects of Silicon Content and Intercritical Annealing on Manganese Partitioning in Dual Phase Steels[J]. Journal of Iron and Steel research, 2010, 5(17):44-50
[12]
A. García-Junceda, F.G. Caballero, C Capdevila, C García de Andrés. Determination of local carbon content in austenite during intercritical annealing of dual phase steels by PEELS analysis[J]. Scripta materialia, 2007, 57(2):89-92
[12]
A. García-Junceda, F.G. Caballero, C Capdevila, C García de Andrés. Determination of local carbon content in austenite during intercritical annealing of dual phase steels by PEELS analysis[J]. Scripta materialia, 2007, 57(2):89-92
[13]
J.Lis, A.K.Lis, C.Kolan. Pressing and properties of C-Mn steel with dual-phase microstructure[J].Journal of Materials Processing Technology, 2005, 162-163(5): 350-354
[13]
J.Lis, A.K.Lis, C.Kolan. Pressing and properties of C-Mn steel with dual-phase microstructure[J].Journal of Materials Processing Technology, 2005, 162-163(5): 350-354
[14]
U.F.Kocks, H.Mecking. Physicsand phenomenology of strain hardening:the FCC case[J]. Progress in Materials Science, 2003, 48(3): 171-273
[14]
U.F.Kocks, H.Mecking. Physicsand phenomenology of strain hardening:the FCC case[J]. Progress in Materials Science, 2003, 48(3): 171-273