Viscosity and free running temperature of ultra-high TiO2 bearing blast furnace slag
PANG Zheng-de1,2, LÜ Xue-wei1,2, YAN Zhi-ming3, BAI Chen-guang1,2, XIE Hong-en4,5, PAN Cheng4,5
1. College of Materials Science and Engineering, Chongqing University, Chongqing 400044, China; 2. Chongqing Key Laboratory of Vanadium-Titanium Metallurgy and Advanced Materials, Chongqing University,Chongqing 400044, China; 3. WMG, University of Warwick, Coventry CV4 7AL, The United Kingdom; 4. Pangang Group Research Institute Co. , Ltd. , Panzhihua 617000, Sichuan, China; 5. State Key Laboratoryof Vanadium and Titanium Comprehensive Utilization, Panzhihua 617000, Sichuan, China
Abstract:Increasing the proportion of V-Ti-magnetite ore in the burden of blast furnace (over 80% even 100%) is of a great significance to the deep development and comprehensive utilization of V-Ti-magnetite resources ore in Panxi area. In view of the situation that the high proportion of V-Ti-magnetite ore brings ultra-high TiO2 blast furnace slag, the technology of "replacing CaO with MgO" for the slag optimization was proposed. The effect of the w(TiO2) and w(MgO)/ w(CaO) on the viscosity and free running temperature of CaO-SiO2-TiO2-MgO-Al2O3slag were investigated. The results indicated that the viscosity evidently decreases with increasing w(TiO2) at a range of 20% to 34%. Conversely, increasing w(MgO)/ w(CaO) from 0.32 to 0.65 causes a slight increase of viscosity of the slag. The free running temperature firstly increases, then slightly decreased with w(TiO2). However, the free running temperature firstly decreases, then increases with w(MgO)/ w(CaO). When w(MgO)/ w(CaO) is near 0.57 (w(MgO) is 12%), the slag free running temperature reaches the lowest point, and the range is about 50 ℃. "Replacing CaO with MgO" leads to the slag liquid phase area move from the vicinity of perovskite precipitated phase to a wide area between perovskite phase and spinel phase. It is feasible to reduce the free running temperature of slag by using "replacing CaO with MgO" w(MgO)/ w(CaO) slag-making, which has important theoretical significance for high-efficiency blast furnace ironmaking process with V-Ti-magnetite ore.
庞正德, 吕学伟, 严志明, 白晨光, 谢洪恩, 潘成. 超高TiO2高炉渣黏度及熔化性温度[J]. 钢铁, 2020, 55(8): 181-186.
PANG Zheng-de, LÜ Xue-wei, YAN Zhi-ming, BAI Chen-guang, XIE Hong-en, PAN Cheng. Viscosity and free running temperature of ultra-high TiO2 bearing blast furnace slag[J]. Iron and Steel, 2020, 55(8): 181-186.
[1] 杜鹤桂.高炉冶炼钒钛磁铁矿原理[M].北京:冶金工业出版社, 1996.(DU He-gui. Principle of Smelting V-Ti-Magnetite in Blast Furnace[M]. Beijing: Metallurgical Industry Press,1996.) [2] 马家源, 孙希文. 钒钛磁铁矿高炉冶炼的强化[J]. 钢铁, 2000, 35(1):4.(MA Jia-yuan, SUN Xi-wen. Intensified smelting of vanadium and titanium magnetite in blast furnace[J]. Iron and Steel, 2000, 35(1):4.) [3] 邓君, 薛逊, 刘功国. 攀钢钒钛磁铁矿资源综合利用现状与发展[J]. 材料与冶金学报, 2007, 6(2): 83.(DENG Jun, XUE Xun, LIU Gong-guo. Current situation and development of comprehensive utilization of vanadium-bearing titanomagnetite at Pangang[J]. Journal of Materials and Metallurgy, 2007, 6(2): 83.) [4] 蒋大军.中钛型磁铁精矿对烧结性能影响的试验[J].钢铁,2018,53(5):18.(JIANG Da-jun. Experiment on influence of sintering properties with a medium titanium magnetite concentrate[J].Iron and Steel, 2018,53(5): 18.) [5] 刘帅, 张宗旺, 张建良, 等. 高钛型高炉渣钛提取工艺研究现状及发展展望[J]. 中国冶金, 2020, 30(3): 1. (LIU Shuai, ZHANG Zong-wang, ZHANG Jian-liang, et al. Research status and development prospect of titanium extraction from high titanium blast furnace slag[J]. China Metallurgy, 2020, 30(3): 1.) [6] DU H G. Theory for Blast Furnace Refining V and Ti-Bearing Magnetite[M]. Beijing: Science Press,1996. [7] 傅文章. 攀西钒钛磁铁矿资源特征及综合利用问题的基本分析[J]. 矿产综合利用, 1996(1):27.(FU Wen-zhang. Basic analysis of resource characteristics and comprehensive utilization of vanadium-bearing titanomagnetite at Panxi[J]. Comprehensive Utilization of Mineral Resources, 1996 (1): 27.) [8] 李兴华, 蒲江涛. 攀枝花高钛型高炉渣综合利用研究最新进展[J]. 钢铁钒钛, 2011, 32(2):10.(LI Xing-hua, PU Jiang-tao. The latest developments of integrated utilization on Panzhihua high titanium-bearing BF slag[J]. Iron Steel Vanadium Titanium, 2011, 32(2): 10.) [9] Monakhov I, Khromov S, Chernousov P, et al. The flow of vanadium-bearing materials in industry[J]. Metallurgist, 2004, 48(7/8): 381. [10] 刘东辉,王晓哲,张建良,等.高炉护炉用含钛物料应用现状及调研分析[J]. 中国冶金, 2018, 28(2): 1.(LIU Dong-hui,WANG Xiao-zhe,ZHANG Jian-liang,et al. Application status and investigation of titanium-containing materials in blast furnace protection process[J]. China Metallurgy, 2018, 28(2): 1.) [11] 孙正汉, 黄晓丽, 丁跃华, 等. B2O3对含钛高炉渣中钙钛矿相及渣铁分离的影响[J]. 钢铁, 2018, 53(2):73.(SUN Zheng-han, HUANG Xiao-li, DING Yue-hua, et al. Effect of B2O3 on separation of perovskite and slag in Ti-bearing blast furnace slag[J]. Iron and Steel, 2018, 53(2):73.) [12] 徐采栋, 林蓉. 攀枝花钒钛磁铁矿高温还原中的重要物理化学问题[J]. 钢铁钒钛, 1980(1): 6.(XU Cai-dong, LIN Rong. Important physicochemical problems in high temperature reduction of Panzhihua vanadium-bearing titanomagnetite[J]. Iron Steel Vanadium Titanium,1980(1): 6.) [13] LIU J M, JIA X Q, LU X J. Study on the formation mechanism and factors on the foam slag for smelting high-titanium bearing blast furnace slag[J]. Iron Steel Vanadium Titanium,1991, 12: 33. [14] JIA B, QI B M. Experimetal study of foaming phenomenon for titaniferous slag during V-Ti-bearing magnetite smelting[J]. Iron Steel Vanadium Titanium, 1996, 17: 10. [15] LI G, MA J, NI H,et al. Tsukihashi[J]. ISIJ International,2006, 46: 981. [16] BAI C, QIU G, PEI H. Research on the foaming property of blast furnace slag bearing TiO2[C]//In VII International Conference on Molten Slags, Fluxes and Salts.[s.l.]: The South African Institute of Mining and Metallurgy, 2004:483. [17] 张亚鹏,赵志星,刘征建,等. TiO2对含钛高炉初渣物相转变与黏度的影响[J]. 中国冶金, 2019, 29(4): 6.(ZHANG Ya-peng,ZHAO Zhi-xing,LIU Zheng-jian,et al. Effect of TiO2 on phase transition and viscosity of Ti-bearing primary slag in blast furnace[J]. China Metallurgy, 2019, 29(4):6.) [18] Seftharaman S, Sichen D, Sridhark S,et al. Estimation of liquidus temperatures for multicomponent silicates from activation energies for viscous flow[J]. Metallurgical and Materials Transactions B, 2000, 31: 111. [19] PANG Zheng-de, LÜ Xue-wei, JIANG Yu-yang, et al. Blast furnace ironmaking process with super-high TiO2 in the slag: Viscosity and melting properties of the slag[J]. Metallurgical and Materials Transactions B, 2020, 51: 722. [20] Duan R G, Liang K M, Shouren G U. The stable energy of glass structure unit[J]. Materials Transactions JIM, 1998, 39: 1162.