1. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083,China 2. Institute for Special Steels, Central Iron and Steel Research Institute, Beijing 100081, China
Abstract:The deformation?parameters in different parts of the gear?and bearing billet during forging?process are different, and the evolution of grain size is very complex. In this paper, material parameters were obtained through the Gleeble isothermal compression test, the secondary developments?of the finite element software?DEFORM-3D were carried based on the YLJ?recrystallization model. The evolution of grain size in different parts?of gear and bearing steel was simulated. The results show that the grain size of gear?and bearing steel changes in pulse during forging?stage, the growth?amplitude of the?grain in different parts during the recrystallization is complicated, the grain size in the bottom edge and the lower part are easy to grow up and the grain size in the center?and the upper part are fine. The simulated grain morphology and grain size in the center and the bottom?edge corresponds well to the actual one. The complex?evolution of grain size during the die forging process can be well predicted with the simulation method proposed in this paper.
黄远胜,杨卯生,李京社,孟文佳,. 齿轮轴承钢坯模锻过程晶粒尺寸演变模拟[J]. 钢铁, 2015, 50(9): 71-75.
HUANG Yuan-sheng,,YANG Mao-sheng,LI Jing-she,MENG Wen-jia,. Simulation of?grain size evolution in the die forging process of gear and bearing steel. Iron and Steel, 2015, 50(9): 71-75.
Niels Hansen. Hall–Petch relation and boundary strengthening. ScriptaMaterialia, 2004,10(51):801-806.
[1]
Niels Hansen. Hall–Petch relation and boundary strengthening. ScriptaMaterialia, 2004,10(51):801-806.
[2]
E O Hall. The Deformation and Ageing of Mild Steel: III Discussion of Results. Proc. Phys. Soc. B,1951,9:742-747.
[2]
E O Hall. The Deformation and Ageing of Mild Steel: III Discussion of Results. Proc. Phys. Soc. B,1951,9:742-747.
[3]
P. Sharifi , Y. Fan , J.P. Weiler , J.T. Wood. Predicting the Flow Stress of High Pressure Die Cast Magnesium Alloys. Journal of Alloys and Compounds, 2014,03(605):237-243.
[3]
P. Sharifi , Y. Fan , J.P. Weiler , J.T. Wood. Predicting the Flow Stress of High Pressure Die Cast Magnesium Alloys. Journal of Alloys and Compounds, 2014,03(605):237-243.
[4]
黄始全. 超高强度钢整体模锻全过程微观组织演化及数字化表征[D]. 中南大学. 2013.
[4]
黄始全. 超高强度钢整体模锻全过程微观组织演化及数字化表征[D]. 中南大学. 2013.
[5]
A Seong-Hoon Kang. Evaluation of flow stress and damage index at large plastic strain by simulating tensile test of Al6061 plates with various grain sizes. [J].International Journal of Mechanical Sciences,2014,80.
[5]
A Seong-Hoon Kang. Evaluation of flow stress and damage index at large plastic strain by simulating tensile test of Al6061 plates with various grain sizes. [J].International Journal of Mechanical Sciences,2014,80.
[6]
Y. C. Lin, Ming-Song Chen. Study of microstructural evolution during static recrystallization in a low alloy steel, Journal of Materials Science, 2009(44):835-842.
[6]
Y. C. Lin, Ming-Song Chen. Study of microstructural evolution during static recrystallization in a low alloy steel, Journal of Materials Science, 2009(44):835-842.
[7]
F. Montheillet , O. Lurdos , G. Damamme. A grain scale approach for modeling steady-state discontinuous dynamic recrystallization. ActaMaterialia, 2009 (57) :1602-1612.
[7]
F. Montheillet , O. Lurdos , G. Damamme. A grain scale approach for modeling steady-state discontinuous dynamic recrystallization. ActaMaterialia, 2009 (57) :1602-1612.