连铸保护渣对20Mn23AlV铸坯表面微裂纹的影响

doi:10.13228/j.boyuan.issn0449-749x.20170233

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (0 KB) HTML (0 KB)
输出: BibTeX | EndNote (RIS)

摘要针对太钢采用连铸工艺并使用低碱度保护渣生产高锰钢20Mn23AlV铸坯表面存在的微裂纹问题，通过现场取样、渣-金反应等试验，结合金相显微镜、扫描电镜和能谱分析等手段系统研究了表面裂纹的特征和形成过程，在此基础上研究了现有低碱度保护渣在使用前后的成分变化、熔点、黏度和传热等指标的变化情况。结果表明，生产过程中低碱度保护渣中的SiO2被钢液中的铝还原，导致液态渣成分发生变化，从而影响了坯壳与结晶器铜板之间的润滑和传热等性能，导致了高锰钢20Mn23AlV铸坯表面微裂纹缺陷。连铸生产钢液中含有强还原性元素（铝）时，应采用低SiO2质量分数的连铸保护渣，以减少高锰钢连铸坯表面微裂纹的产生，提高铸坯表面质量，实现高锰钢连铸生产顺行。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	李建民
	姜茂发
	翟俊
	孙丽枫

关键词 ： 20Mn23AlV, 连铸保护渣, 表面裂纹, 渣-金反应

Abstract：In present work，the continuous casting（CC）production of high manganese steel 20Mn23AlV in the TISCO and the slab surface cracks of the 20Mn23AlV were investigated. By means of industrial samples and the slag-metal reaction experiment，the characteristics and forming process of slab surface crack were systematically studied through the metallographic microscope，the scanning electron microscopy and the energy spectrum analysis. While the variation of indexes such as the chemical compositions before and after mold fluxes were used，melting point，viscosity，heat transfer and so on were studied. The results showed that the SiO2 in mold fluxes was deoxidized by the Al in the molten steel，leading to changes of the mold fluxes composition during the continuous casting process，and properties of the lubrication and the heat transfer for mold fluxes also changed，which could increase slab surface cracks of high manganese steel 20Mn23AlV. Therefore，during CC production of the steel with strong reducibility element（Al），low SiO2 content mold fluxes should be used in order to reduce slab surface cracks，improve the surface quality of slab and ensure CC production of high manganese steel smoothly.

收稿日期: 2017-05-12 出版日期: 2017-09-07

引用本文:

李建民，，姜茂发，. 连铸保护渣对20Mn23AlV铸坯表面微裂纹的影响[J]. 钢铁, 2017, 52(9): 48-53. LI Jian-min，，，JIANG Mao-fa，. Effect of mold fluxes on slab surface crack for 20Mn23AlV. Iron and Steel, 2017, 52(9): 48-53.

链接本文:

http://www.chinamet.cn/Jweb_gt/CN/10.13228/j.boyuan.issn0449-749x.20170233 或 http://www.chinamet.cn/Jweb_gt/CN/Y2017/V52/I9/48

[1]	施威. 20Mn23AlV高锰低磁钢的连铸生产[J]. 上海金属, 2006, 28(3): 57-60.
[3]	殷荣幸, 瞿卫东. 20Mn23A1V无磁钢与Q235低碳钢的埋弧焊焊接工艺[J]. 金属加工(热加工), 2011(10): 68-69.
[2]	谭志楹. 关于20Mn23A1无磁钢焊接裂纹的探讨[J]. 变压器, 1993, 23(10): 34.
[4]	张宇斌, 文光华, 于雄等. 高铝奥氏体无磁钢20Mn23A12V板坯连铸结晶器保护渣的研究[J]. 特殊钢, 2013, 34(6): 22-25.
[3]	殷荣幸, 瞿卫东. 20Mn23A1V无磁钢与Q235低碳钢的埋弧焊焊接工艺[J]. 金属加工(热加工), 2011(10): 68-69.
[4]	张宇斌, 文光华, 于雄等. 高铝奥氏体无磁钢20Mn23A12V板坯连铸结晶器保护渣的研究[J]. 特殊钢, 2013, 34(6): 22-25.
[5]	张增武. 无磁钢20Mn23AIV冶炼和连铸生产实践[J]. 山西冶金, 2012, 35: 21-24.
[5]	张增武. 无磁钢20Mn23AIV冶炼和连铸生产实践[J]. 山西冶金, 2012, 35: 21-24.
[6]	闫威, 陈伟庆, 郑宏光等. 无磁钢20Mn23AlV保护渣液渣和渣圈性能变化对连铸的影响[J]. 特殊钢, 2013, 34(1): 45-48.
[6]	闫威, 陈伟庆, 郑宏光等. 无磁钢20Mn23AlV保护渣液渣和渣圈性能变化对连铸的影响[J]. 特殊钢, 2013, 34(1): 45-48.
[7]	Zhang Z T, Wen G H, Tang P, et a1. The Influence of A12O3/SiO2 Ratio on the Viscosity of Mold Fluxes[J]. ISIJ International, 2008, 48(6): 739-746.
[7]	Zhang Z T, Wen G H, Tang P, et a1. The Influence of A12O3/SiO2 Ratio on the Viscosity of Mold Fluxes[J]. ISIJ International, 2008, 48(6): 739-746.
[8]	Becker J J, Madden A M. Natarajan T T, et a1. Liquid/Solid Interactions during Continuous Casting of High-A1 Advanced High-Strength Steels[C]//AISTech 2005: Proceedings of the Iron and Steel Technology Conference Vol 2, May 9-12, 2005 Charlotte, Pittsburgh: AIST, 2005: 99-106.
[8]	Becker J J, Madden A M. Natarajan T T, et a1. Liquid/Solid Interactions during Continuous Casting of High-A1 Advanced High-Strength Steels[C]//AISTech 2005: Proceedings of the Iron and Steel Technology Conference Vol 2, May 9-12, 2005 Charlotte, Pittsburgh: AIST, 2005: 99-106.
[9]	Zhou L J, Wang W L, Ma F J, et a1. A Kinetic Study of the Effect of Basicity on the Mold Fluxes Crystallization[J]. Metallurgical and Material Transactions B, 2012, 43(2): 354-362.
[9]	Zhou L J, Wang W L, Ma F J, et a1. A Kinetic Study of the Effect of Basicity on the Mold Fluxes Crystallization[J]. Metallurgical and Material Transactions B, 2012, 43(2): 354-362.
[10]	Zhu C Y, Han W D, Liu C J, et a1. Crystallization Temperature and Crystallization Ratio of Mold Flux[J]. Journa1 of Iron & Steel International, 2005, 12(6): 23-26.
[10]	Zhu C Y, Han W D, Liu C J, et a1. Crystallization Temperature and Crystallization Ratio of Mold Flux[J]. Journa1 of Iron & Steel International, 2005, 12(6): 23-26.