钢铁研究学报(英文版)

钢铁研究学报(英文版)

　

首页期刊介绍编委会投稿指南期刊订阅广告服务留言板联系我们 English

　

在线办公平台

　

　

在线期刊

　

　

　

　

　

论文下载排行

　

论文点击排行

　

　

文章快速检索

2006年 1卷 4期刊出日期：2006-08-15

Abstracts Material Metallurgy Review

Abstracts

	0	ZHOU Xiao-guang;LIU Zhen-yu;WU Di;WANG Wei;JIAO Si-hai
		Modeling of Incubation Time for Austenite to Ferrite Phase Transformation
		On the basis of the classical nucleation theory, a new model of incubation time for austenite to ferrite transformation has been developed, in which the effect of deformation on austenite has been taken into consideration. To prove the precision of modeling, ferrite transformation starting temperature (Ar3) has been calculated using the Scheil’s additivity rule, and the Ar3 values were measured using a Gleeble 1500 thermomechanical simulator. The Ar3 values provided by the modeling method coincide with the measured ones, indicating that the model is precise in predicting the incubation times of austenite to ferrite transformation in hot deformed steels.
		2006 Vol. 1 (4): 0-0 [摘要] ( 2613 ) [HTML 0KB] [PDF 0KB] ( 24 )

Review

	0	ZHANG Li-feng
		Indirect Methods to Detect and Evaluate Inclusions in Steel  A Review
		Indirect methods to detect and evaluate inclusions in steel are extensively reviewed, including total oxygen measurement, nitrogen pickup, steel and slag composition measurement, lining refractory observation, tracer studies to determine exogenous inclusions from slag and lining erosion, SEN clogging and final product tests. There is no single ideal method to detect and evaluate inclusions in steel, so it is best to couple several methods together to give a more accurate evaluation. Total oxygen content and nitrogen pickup in low carbon aluminum-killed steel as criterion of clean steel in many plants are summarized.
		2006 Vol. 1 (4): 0-0 [摘要] ( 3773 ) [HTML 0KB] [PDF 0KB] ( 8 )

Material

	0	CHEN Zheng;;LI De-ren;;LU Zhi-chao;;ZHOU Shao-xiong;
		Giant Stress-Impedance Effect in Co71.8Fe4.9Nb0.8Si7.5B15 Amorphous Glass-Covered Wires
		The giant stress-impedance (GSI) effect in as-cast and DC current annealed Co71.8Fe4.9Nb0.8Si7.5B15 amorphous glass-covered wires is presented. The SI ratio of the as-cast sample exhibits negative GSI effect. For the sample annealed by 60 mA DC current, the SI ratio first increases with applied tensile stress, then decreases with the applied tensile stress. The maximum ΔZ/Z ratio of 304% is obtained. Frequency dependence in the range from 1 to 110 MHz of the GSI effect is investigated. Experimental results show that the real part R and the imaginary part X of impedance play an important role at high frequency and low frequency, respectively. At 1 MHz, the maximum ΔX/X of 1 448% is obtained. At 110 MHz, the maximum ΔR/R ratio of 648% is obtained.
		2006 Vol. 1 (4): 0-0 [摘要] ( 2070 ) [HTML 0KB] [PDF 0KB] ( 30 )

	0	ZHANG Guang-ye;;ZHANG Hua;ZHANG Hou-an;WU Xian-ming;GUO Jian-ting
		Superplasticity of Directionally Solidified NiAl-15Cr Alloy at High Temperature ^Hot!
		Ni-25Al-15Cr (atomic percent, %) alloy was directionally solidified (DS) under argon atmosphere in an Al2O3-SiO2 ceramic mold by standard Bridgman method. The microstructure of the as-fabricated alloy was studied using optical microscope, X-ray diffractometer, and scanning electron microscope. The alloy consisting of dendritic -NiAl phase, interdendritic  phase, and transient layer  phase, has been investigated. This alloy exhibits superplastic deformation behavior at 1 273−1 373 K over an initial strain rate range of 8.35×10-4−1.67×10-2 s-1. The maximum elongation of 280% with strain rate sensitivity index m=0.22 was obtained at the temperature of 1 323 K and an initial strain rate of 8.35×10-3 s-1. Transmission electron microscopy (TEM) observations indicate that the superplastic deformation stems from the balance between high resistance (by dislocation sliding) and strain softening (by dynamic recovery and recrystallization).
		2006 Vol. 1 (4): 0-0 [摘要] ( 2152 ) [HTML 0KB] [PDF 0KB] ( 20 )

	0	XU Guang-ming;LI Bao-mian;CUI Jian-zhong
		Interfacial Microstructure of Al-Sn-Pb Alloy/Steel During Liquid-Solid Bond Rolling
		Studies were conducted on the interfacial microstructure of a steel/liquid aluminium and its evolution during the bonding rolling process. The effects of wetting time and rolling deformation on the diffusion layer and on the bonding strength were examined. By means of electron microscopy and electron probe analysis, it was found that the diffusion layer is mainly composed of FeAl3. For a steel temperature of 250 ℃ and an aluminium temperature of 850 ℃, the diffusion layer was formed within 3 s, and the shear strength of the samples increased after 8 to 14 s. Although the interface was not damaged, it was deformed notably. For an aluminium temperature of 750 ℃ and a wetting time of 11 to 17 s, the shear strength of the interface remained high, but the interface was obviously broken during rolling, leading to reduced bonding strength.
		2006 Vol. 1 (4): 0-0 [摘要] ( 1696 ) [HTML 0KB] [PDF 0KB] ( 23 )

	0	ZHOU Jian-qiu;Akhtar S. Khan;CAI Rui;CHEN Ling
		Comparative Study on Constitutive Modeling of Tantalum and Tantalum Tungsten Alloy
		As a model bcc metal, tantalum and its alloys have wide applications in defense-related fields. The KHL (Khan, Huang, Liang, 1999) model and the constitutive model proposed by Nemat-Nasser et al (Nemat-Nasser and Kapoor, 2001) for tantalum and its alloys were analyzed and compared with each other. A set of published data recorded during elastic-plastic deformations of tantalum, tantalum alloy containing tungsten of 2.5% (Ta-2.5W), over a wide range of strains, strain rates, and temperatures were used to correlate the two models. Overall, it can be concluded that KHL model correlates much better with the data than the model used by Nemat-Nasser et al.
		2006 Vol. 1 (4): 0-0 [摘要] ( 1906 ) [HTML 0KB] [PDF 0KB] ( 30 )

Metallurgy

	0	HU Xian-qi;LIANG Cheng-hao;HUANG Nai-bao;
		Anticorrosion Performance of Carbon Steel in 55%LiBr Solution Containing PMA/SbBr3 Inhibitor
		The anticorrosion performance of carbon steel in 55%LiBr solution containing PMA/SbBr3 inhibitor was studied by weight-loss tests, electrochemical measurements and surface analysis. In 55%LiBr+PMA/SbBr3 solution, corrosion rates of carbon steel at 145 ℃, 175 ℃, 190 ℃ and 240 ℃ are 18.32 μm•a-1, 27.68 μm•a-1, 53.58 μm•a-1 and 73.78 μm•a-1, respectively. PMA/SbBr3 inhibitor may inhibit the corrosion of carbon steel in 55%LiBr solution effectively. Especially, it shows an excellent corrosion inhibition performance agent at high temperature. Both anodic and cathodic reactions of carbon steel may be inhibited by PMA/SbBr3 inhibitor, and so it may be classified as mixed inhibitor. In 55%LiBr+PMA/SbBr3 solution, the apparent activation energy of the corrosion reaction of carbon steel is 29.61 kJ•mol-1. The corrosion inhibition mechanism of PMA/SbBr3 is suggested as follows: PMA has the effect of inhibiting hydrogen producing and a strong oxidizing property; Sb3+ also exhibits oxidizing properties, and can exist stably with PMA in LiBr solutions; the passive film comprising Fe2O3 and antimony formed on carbon steel surface may prevent bromine- from diffusing into the metal surface due to the synergistic effect of PMA and Sb3+; As a result, the anticorrosion performance of carbon steel may be improved by PMA/SbBr3 inhibitor in 55% LiBr solution.
		2006 Vol. 1 (4): 0-0 [摘要] ( 1818 ) [HTML 0KB] [PDF 0KB] ( 24 )

钢铁研究学报(英文版)

　

编辑部公告

　

　

·	《钢铁研究学报》第二届青年编委招募

·	《钢铁研究学报》英文版“极端环境下材料的腐蚀和磨损”专刊征稿启事

·	《钢铁研究学报》英文版“钢铁冶金固废资源化利用”专刊征稿启事

·	《钢铁研究学报》英文版“多相多尺度冶金过程数值仿真”专刊征稿启事

·	《钢铁研究学报》英文版“人工智能在钢铁冶金及材料中的应用”专刊征稿启事

　　　　　　　　　　更多

　

作者指南

　

　

　

　

　

　

读者会员登录

　

　

友情链接

　

　　　　　　　　　　更多

版权所有 © 《钢铁研究学报(英文版)》编辑部　
地址：北京市海淀区学院南路76号　邮政编码：100081